Dual PSU Power Supply 24-Pin ATX Motherboard Adapter Cable(30cm)

A great alternative to Add2PSU for hooking up multiple power supplies. At this point I've purchased at least 5, and I have never had an issue.In terms of usability, it is pretty much plug and play. The end with the single 24pin connector goes into the motherboard, the end with the 20pin+4pin connector goes into the motherboard power cable for the primary power supply (I usually designate this one as the one that you have the CPU 8pin connector going into. Although I don't think it really matters as both power supplies turn on at exactly the same time), and the remaining 24 pin connector with only two wires goes into the motherboard power cable for the secondary power supply.For those of you who are more ambitious miners (think 12+ gpu rigs) you can simply daisy chain these adapters together to accommodate as many psu's as you want (it took while for me to think of this solution, so I thought I would share). So in the end these cables provide the ultimate flexibility at a decent cost and without having to mess with custom wiring or Add2PSU's which may or may not work for you (personal experience).The only point of confusion for me (albeit momentary) occurred the first time that i used these. These work with your existing psu power cables, these are not a replacement for them. So don't expect these cables to plug directly into your power supply. The pros and cons of this are extra cabling and extra cabling. It's nice to have flexibility of being able to place the psu pretty much where ever you want relative to the PSU, but for those who want everything tidy, the extra cabling may be an annoyance.A definite recommend. Miners out there enjoy!

This is a quality PSU splitter. It securely snapped into place and has been working well for a couple weeks now.

Been using it for a 6 months still works good.

The gauge of the wire at the 24-to-24 is really thin. But it's cheap and it works. Just not sure for how long.

Does exactly and perfectly what it is supposed to do. Tight fits. Lets you use one power switch and both systems kick on instantly. The only possible improvement could be:1. Price (one will always happily pay less for the same thing)2. Some notch one could use for securing it, although good-ole' twisty ties will work.

It arrived today plug in to a system not my main system cause had read the reviews and someone said it blew up there gaming system. and yep one i connected the 2 power supplies it shorted out and melted the cable

Be careful, many of the wires came out of the connector - they are very loose.

Awesome product, it does what it promises to. The 24 pin mobo cable locks in tight, but actually let's you remove it WAY easier than most other 24s I've used. I bought new PSUs after buying this cable, they came with their own clips to short them out, but I'm still using this cable. 5/5

Working just fine for me, arrived as described, plugs in and works! Saves me the hassle of tracking down a 3 way one i just hooked 2 of these together and now all 3 of my PSU's are turning on at the same time.

Repinned this to make an adapter for an HP to regular ATX power supply cable.It worked fine. My only complaint is that the cord is a bit flimsy. Honestly this would work fine for someone running two PSUs for Bitcoin mining or the like.This is a lot cheaper than dedicated adapters on the market. I would buy again.

work good

worked without issue. not much more to say. cables are also very flexible and not stiff which can be good in smaller environments.

Not recommended. It will destroy your board or power supply