Rubber U Channel Edge Trim, Door Seal Strip, Fits Edge up to 1/16 Inch (1. 6mm) U Shape Weather Stripping(10 Feet,Black)

Used to put a seal around a 12" diameter piece of glass. Works great. Is very pliable and easy to install.

Brought this is for my steel raised garden beds. Easy to install and stays in place.

I put this on the edges of 29 gauge 3 rib roof metal that was low enough to touch to make it safer. The seal strip is made to grip material thicker than 29 gauge so it did not grip well. I had to run a bead of clear silicone caulk on both sides of the edge first, smooth it out, and let it mostly cure, then press the trim onto the edge. When that was cured I ran another bead between the metal and the trim and smoothed it out. That glued it on pretty well. On the ends going over the ribs it was a challenge to keep the rubber on the metal where it made sharp bends around the ribs. That was solved with a bunch of spring clothes pins to hold the rubber in place while the silicone cured. Then covered the whole thing with spray cans of rubber seal material. Edges are safe and waterproof.

Awesome

Trim wasn't deep enough to stay on . I used it to cover the edges of ruff wire on cages. Would have worked better if it were deeper pocketed so it wouldn't keep coming off.

Super thin and flimsy. Not quite what I hoped it would be. Super soft and flexible. It doesn't quite create the seal that such rubber channeling should and was a waste of money frankly.

Actually used this on my cymbals. Well made, does not fray yet easy to cut. Durable.

Fits great and is decently thick. Decent grip (stays on) on 16 gauge, but I would recommend gluing in a few spots if its not being sandwiched. This does not lock on, just friction from rubber. I used it to line the edges of a radiator fan shroud.