GIB cleaningtool 3 x Bristle Brush for iRobot 600 700 Series Vacuum Cleaning 620 630 650 660 680 760 770 780 790

Overall these brushes seem to pick up okay but I have three observations.First the yellow end cap is too large to allow the brushes to be cleaned using the standard Roomba round brush cleaning tool so the end cap has to be removed from the brush to clean it. On two of the three brushes the end cap came off with minimal force. On the one I installed (of course), it took a bit more effort. Once removed, the round cleaning tool fits just fine.Second the bristles seem to be softer than the stock Roomba brushes. I'm not sure if this is an issue or not.Finally, these brushes don't seem to work as well with the Aerovac bin as other brushes I've used. More "fuzzies" are left behind on these brushes, requiring the brushes be cleaned almost every use. I wonder if it might be because of the softer bristles.Update: 2/21/15 Balls of crud were building up between the shield and the gearbox side of the brush deck. This would cause a "clicking" sound due to the brushes binding. There was too much play in the brush which allowed a gap between the shield and the brush deck wall. That gap allowed crud to get in. I solved this problem by adding a thin washer behind the yellow end cap. I had to experiment to get the right thickness of washer but it eliminated the play in the brush. No more crud build up.

I have had the same Roomba for 3 years and try to keep it cleaned. The brushes get hair or carpet strands in the brushes. I was glad to be able to purchase just the brushes since I have to change them more often than the other things.

Not as good as roomba brand, but still gets the job done. Need to replace more often but that is expected with the price.

I purchased these from shoppingzone2014 and they were quickly shipped by Amazon fulfillment. They were of good quality and work well in my Roomba 595 pet series I purchased from Costco.Note: I (mistakenly) purchased 500 series replacement rollers for my Roomba 595 vacuum only to find out that my 595 series vacuum requires 600/700 series rollers. I guess the geniuses at I-Robot didn't quite think that through. Don't make the same mistake.

exactly what I ordered...easy to install too

Exactly what I needed. Fits well. Its very affordable and so much better than trying to pull out all the mess and hair from an old brush.

These brushes are softer than the original iRobot and they have to be replaced more often, but they do the job and are way cheaper.

Good product, same as OEM

good product. works well for the price point

Don't fit correctly.