IOGEAR 4-Port USB VGA KVM - GCS22U

I just bought this KVM. Here are a few thoughts after using it for a few days: REASON I BOUGHT THIS ONE: It had two USB 2.0 ports, and no PS2 ports. IOGear has had some great customer reviews for this, and other KVM products. I liked the fact that I plugged my own DVI cable into the switch to my monitor making cable length irrelevant. And finally, the one negative review I did see here was answered directly by an IOGEAR representative attempting to address the problem. PACKAGING: Nice cardboard box, foam wrap around all internal components, manuals were in color and in plastic bags, the manual content is complete but concise in English. QUALITY: Everything seems to be made of sturdy high quality components. The cables are thick, well insulated, and are generous length. You would only need to be concerned with cable length if your two machines are over 10 feet away from each other. There are plastic caps that cover the stereo cables if not in use and the cables themselves are color-coded. The cables plug into the switch ports firm and secure. HOOK-UP: Couldn't be easier. There was no need to look at the manual, everything is intuitive enough. There is a mini stereo jack cable for your left/right speakers and then one for your microphone. I have a 4.1 surround setup and I don't have a need for a microphone. Well, good news for those like me... just use the microphone stereo port for your rear left/right and you will have full 4.1 surround through the KVM. This was a great surprise, and it works. INITIAL IMPRESSIONS: One problem I ran into was that my Logitech MX510 mouse has 5 additional buttons. When run through the KVM it only detects a standard three button scroll wheel mouse. I never really used these buttons anyway, but it required me to reconfigure the mouse driver to speed up the cursor movement again. I hid the KVM switch behind my desk and only see the slim remote button. The bottom of the button has a no-slip rubber pad, so you can lay it on your desk flat and it won't really slide anywhere. The button itself is easy to find and press without having to look at it. Everything else worked great right out of the box. Since this is a digital KVM switch, you don't have to worry about quality of the signal. Either the signal arrives or it doesn't. You get perfect clarity or nothing at all. In my case, it's perfect. There is absolutely no difference in display quality when compared to directly connected the computer to the display. MY SPECS: Computer #1 is an older XP machine with a ATI 9800 graphics card. The other machine is an HP running 64-bit Windows 7 with a GeForce 260. The mouse is a Logitech MX510. The keyboard is an older Microsoft split ergonomic PS /2 keyboard. I used a USB adapter without any issues at all. I hooked up a PC Works FourPointSurround (with subwoofer) through the two mini-stereo ports. Like I mentioned earlier, you can use any equipment that uses two mini-stereo ports, it doesn't have to be a microphone. FINAL THOUGHTS: I am completely satisfied and this product has met my expectations. My opinion of IOGear has increased a few notches. When looking for future hardware, I'll certainly give IOGear a favorable consideration.

I am a Hospital Corpsman, and it is a pain to have two different systems for the Clinic and the Marines. Having a laptop and a desktop with large dual monitors is fantastic, but I needed to save space on my desk. This allows me to do that. It flawlessly switches between the two computers on a single monitor. Does not have any issues with leaving my CAC in the keyboard and asks for my pin to log me back in. I then push the button on the other monitor and bam, I'm cookin'!

Regarding: GCS1944; Sorry if TLDR; [UPDATE 2021.09.14] - GXS24KIT (rackmount kit) I obtained this rack kit item to add on my GCS1944. The width of each ear is actually 2 7/8 inches, which is good, and thankfully they are not a full 3 inches as specified on their web site. After adding the ears to the GCS1994, the full width of the switch is now just a hair under 19 inches, which should work out perfectly for me to add this KVM switch to a rack. [ORIGINAL REVIEW, minus rackmount references] Overall, it seems to work, with caveats. I don't believe that DP was designed with KVMs in mind. The port switching transitions involving DP sources take longer, and IOGear's product doesn't seem to add performance benefits on that front. The ConnectPro brand boasts faster transitions (and some amount of built-in EDID transition support), but you might have other issues with their KVM products, and they cost more and are backordered, so I picked up the GCS1944 for now. With most DP-KVMs, there are port transition issues that arise (resolution/window positioning/non-waking). Supposedly upcoming Windows 10 updates may address these to some extent, but it may not be exactly perfect from what I've read. I don't know that the updates will be able to address the non-waking monitor issues. I can't speak to a Linux system experience with this KVM currently. Details on my GCS1944 assessment follow. -----GENERAL PERFORMANCE: My systems that have any DP source output take from about 15 to 20 seconds to transition (KVM/Audio/USB). The IOGear support staff will see those timings as normal. My systems connected with only HDMI or DVI sources generally transition for me within 8 seconds. -----OTHER ISSUES (not including slow transitions): 1) [Windows] Improper resolution upon waking; 2) [Windows] Window Re-positioning upon waking; 3) Monitor doesn't wake at all; - SEE 'TIPS FOR TRANSITION' NEAR THE END OF THIS POST ON RESOLVING THESE ISSUES -----GCS1944 items to note: -My firmware is newer than what is available online for this model. Mine came with v1.1.102, online only has 101. The support staff eventually stated that mine was a "firmware we are testing," and another stated it as "shipping firmware only"... which seems rather odd to not provide the firmware online as well if it's shipping with the product. One of them actually stated "I wouldn't recommend using yet"... even though they are shipping with the product? Another said I should just stick with 102. There seems to be no way to "backup" the existing firmware. Then it seems that in the world of KVM manufacturers, there is an "aversion" to publishing all the different firmware one could potentially use, well noted with ConnectPro customers for example. -My system performs more in line with the comparable ATEN CS1944DP documentation, which I believe is mostly the exact same hardware. I'm not sure if this is a result of the 102 firmware, but the HSM-[Q] command works on mine for Monitor Re-detection, which is not documented in the current GCS1944 pdf, not sure if that works with 101 firmware. Also, quick port pressing moves over ALL items (kvm+audio+usb) by default, as described in the ATEN documentation, where the GCS1944 documentation states that it will only move the KVM over. Although I see you can manually toggle that change that with [HSM]+[S]. If I could backup/restore the 102 version, I would try 101 perhaps to see if there were any performance benefits, but I would be concerned if the monitor re-detection option is missing. -Online specs describe the GCS1944 as being 13.9 inches wide, this is wrong. It could be a simple typo, as the ATEN equivalent documentation states 13.19 inches, which is the more accurate item dimension. -----Details on my setup and related GCS1944 experience so far: -Currently using older 1080p monitors, 2 matching model ViewSonic monitors with DVI connections using DP-to-DVI active adapters from the KVM. It works fine, no loss of clarity. Whenever the source is straight DP to the KVM, I'm more likely to experience issues. If I use HDMI or DVI adapters to DP (both Active), any issues are far more rare. Although I've been planning to update my monitors, I wonder how newer monitors with DP ports could impact performance. -Using wired mouse and keyboard at this time. -Some of my systems with DP sources (but not all) occasionally fail to wake, or wake with reduced resolution settings. This happened so often from a GTX-1660 Super card, that I ended up switching that connection to the DVI output instead (with VisionTek DVI-to-DP) to go along with an existing HDMI out, and now the transition for the 2 monitors for that system occurs in about 8 seconds (as opposed to 20 seconds before), and has no need to run PW or MK for window positioning (see 'TIPS' below), although I think I had non-waking issue once. On an older laptop with docking station and 2 DP outs, lots of issues. I'm concerned about how the GTX-1660 Super card (w/up to date drivers) will perform in the future should I need the DP port again for higher resolutions. -Perhaps IOGear/ATEN can come up with some newer firmware that will allow for faster DP transitions. As it is, they should post more firmware options online, even beta firmware, as one size may not fit all. When I mentioned the transition delays up to 20 seconds to tech support, this was not surprising to them. Another option could be adding a software agent to the host computer that could be triggered upon the KVM USB activation, although I'd think they could design ways to store monitor profiles on the KVM itself, and just invoke the profiles via hotkey commands. -----AUDIO: I'm using a line mixer to feed from the computer audio outputs, so I haven't been concerned as much about running the audio through the KVM up to this point. I only use the microphone with one system, so that is plugged in directly to that system's front interface. -----Tech Support: As was stated appropriately elsewhere, regardless of the medium you use to communicate with, many among the IOGear support staff seem highly "peevish." Not all of them are this way however. -----TIPS for TRANSITION ISSUES (mostly when straight DP-to-KVM sources are involved): --- Resolution issues: I've encountered resolution issues occasionally on some of my systems with DP sources. As to WHY, I believe this could be related to varying monitor configurations defined in the Windows registry, and Windows may use the wrong entry sometimes. Search for posts related to: HKLM\System\CurrentControlSet\Control\GraphicsDrivers\Configuration Outside of the registry editing (which I haven't tried yet), I've had some success using the KVM hotkeys ([HSM]+[Q]+[<port #>]+[ENTER]) to re-detect the monitors to return to the proper resolution. --- Window Positioning: Consider running 'PersistentWindows' (now on v 5.7); or MonitorKeeper. I suggest running them "as administrator". Both Free! For Win7 systems, PW has done better for me. I also have DisplayFusion, which allows you to save/restore window positions. However with DF, on restoring, the focus won't realign the same, and I believe it restores previously minimized windows. I believe PW can also save/restore snapshots, haven't tried it yet. But I still like DF for other dual display purposes. But with PW, I haven't really needed to save/restore so far, it does well without. --- Monitor Not Waking- try these commands before resetting the display cable: * Restart Video Driver: [CTRL]+[SHIFT]+[WIN]+[B] -Windows 10/11 only * KVM hotkey re-detect: [HSM]+[Q]+[port #]+[ENTER] -If supported by KVM firmware * Display Mode Selection: -Windows only; [WIN]+[P], then select something other than Extend (like 'Duplicate'); then invoke Win+P again, reset to 'Extend'; This works on Win7 as well! You may lose window positioning with this command, but it should at least wake the monitor. This last option may be the most reliable means to re-awaken the monitor outside of unplugging/re-plugging in the cable . -Question: Will 'always-active' DDC-EDID phantom connectors help the resolve DP EDID non-waking issues? Not a cheap add-on, and there are not many options out there. The related technology is far from perfect at this time from what I've read. CONCLUSION: I'm making do with the GCS1944 for now, I hope it will serve me for a fair amount of time.

All I needed was a nice simple KVM switch, just to take a USB keyboad and mouse and two computers with VGA graphic outputs (as opposed to digital) and these outputs to one monitor, and that's exactly what this small unit does. Quality is perfectly acceptable, and the fact it has a remote control switch means you can have the switch itself hidden away on the floor somewhere and still be able to easily switch between systems (I have the switch attached on my keyboad with some self adhesive velcro). There is no intelligence in this switch (which in my eyes is a very good thing, keeps things simple) so when you switch it, it in fact physically disconnects the keyboard/mouse from one comuter (you can hear windows make the usb device removed sound) and physically switches the input to the other machine (again you can hear windows usb device connected sound). No problems at all, out of sight and very convenient. And for a fantastic price.

I had a very old monitor connected to my CCTV. I added another PC next to it only for remote connection and didn't want to add a new monitor for that. I bought this product and connected my new PC with my CCTV system monitor. Its does support wireless mouse and keyboard which was a plus. Recommended.

The IOGEAR 2-Port HD Cable KVM Switch with Audio GCS62HU great product, very easy to install plug in and use. quick to switch between my 2 PC's, very reliable

I bought this as a replacement for one of the fancier multi input 2 computer KVM switches which turned out to freeze up my mouse or keyboard or both at random intervals. I'm running a relatively new model Dell XPS 9850 and an older Dell XPS 8700 with stock Dell mouse/KB and it just works perfectly. I like the long cables which allowed me to mount them some distance apart. I like the remote switch which allowed me to situate the box back with the rest of the cables. I like the fact that there is a separate mouse and keyboard input to each computer. I think that my newest Dell doesn't like having the mouse/keyboard go through a hub which may be why it didn't work with the fancy KVM I returned. The video is rock solid when I switch between the two Dells. So yeah, I'm going to buy more of the boxes. Keep up the good work IOGEAR :-)

tres bon produit , de bonne qualité , ravis de mon achat . . . . . . . .