SANODESK63-Inch Large Dual Motor L-Shaped Electric Height Adjustable Standing Desk - Reversible Panel - White Top/White Frame - Ideal for Gaming, Home Office or Computer Workstation

As you can see with the (messy) photo, the desk has a simple, clean look to it. You can measure everything out all day long, but until you see it in person (or real life photo), it's tough to gauge what all you can put on said desk. This desk has plenty of space for my wife to put endless amounts of sticky notes and workbooks, multiple monitors, and a couple cups.The stand up feature works great and with the zipties/clips that come with it, it helps give that clean look. (the wires you see dangling below are actually from the laptop and monitor).The desk was straight forward to put together - until you got to the part where you needed to actually drill the pieces together (the most important part). I had to google/youtube how they put it together with a slightly different model and it was enough to get me through. I also had the hardest time figuring out which end of the table should be connected to which (this desk is made up of two big pieces for the tabletop). I ended up giving up, grabbed my drill bits and drilled in additional holes into it and was able to drill in the standup buttons that control the unit, and a connector piece (that gives support and helps tie-in the two tabletops).Recommendations to company: Provide a link to a video putting the unit together - and don't skip the hardest part. I understand it's a selling point saying "SEE LOOK HOW EASY IT IS" but your actual customers will appreciate the extra step here. You can also make this link unlisted and share it only in the instructions after someone buys it - no one else will see it.My tabletop came damaged. You guys packed it fairly well, but there was a small chunk taken out of the top corner of the desk, which stinks. Is it worth the hassle to send the entire thing back and have you guys lose probably $100 in shipping because of it? No. Do I need to go out and buy a bit of filler and paint over a brand new desk I paid hundreds of dollars for? Yes.The packaging was actually fairly impressive, but obviously the shipping company couldn't care less about that and it's as if they actually try to damage products at times - I would add another styrofoam layer specifically around the corners to prevent this. The tiny cost of adding this would be miniscule compared to having numerous customers sending it back who are pickier than I am.Overall great product, would recommend. A free afternoon and you have an attractive standup desk to last you for a long while.

The media could not be loaded. After two years in home office, I developed some back problems because I was spending too much time sitting, between working and gaming, my sciatica was killing me, and this standing desk has been a great solution to improve my posture and prevent the pain from coming back.My first concern was that, because it’s a big package, it could arrive very damaged and therefore the product too, but everything was practically flawless, the only damage was a small dent on one of the edges of the tabletop that fortunately is on the outside of the desk.The assembly was relatively simple, the only setback is that the panels do not have all the holes marked, you have to do some of them on your own, but that is because the L can point to the right or left side depending on how you place it.There are few pieces involved since each leg comes pre-assembled with the integrated motor, which in the end makes the structure feel solid and sturdy, without any type of sway even when extended to its maximum height.The desk is quite silent when activated and the programmable control panel is easy to understand, it follows the usual car stereo steps to remember a height or set an alarm.The two one-inch boards are made of compressed wood but are very heavy and solid with a textured plastic finish on all sides and its HUGE size is ideal for multiple monitors, consoles and/or PC.The desk doesn't offer any cable management options but I was able to easily modify it with a couple of trays I bought from Amazon and added a monitor riser I made from a Home Depot shelf and legs from Amazon.After using the desktop for two full weeks I have felt that my productivity is improving, and despite I’m 6’4 the height of it adapts perfectly and even exceeds it. Now I can spend more time in my work area without my back suffering and I’m sure that this will bring me benefits in the future.

Love my new desk. 3 programmable presets. Fairly sturdy. Assembly directions were adequate - even gave Left Return & Right Return directions with pictures. Only 1 pre-drilled hole was not in the right location but it wasn't critical in my case. Foot levelers present, max range appears to be 1/4"-3/8".

This desk is EXACTLY as pictured and once it is put together it is absolutely perfect. HOWEVER. Heed the warnings that other reviews have expressed. It is not user-error as I had believed. The instructions are simply THAT BAD. The pictures in the instructions are extremely hard to understand and there were parts that we didn't even need. Also the parts weren't labeled well (if at all). We had to drill multiple new holes as NONE of the holes matched up and there are a TON of holes so it took a long time to figure that out that we would have to drill holes - I think because the pieces are meant to fit multiple different types of desks. If you have someone who is handy (like I did) this is a wonderful desk and I absolutely love it now that it is together but if you don't and you don't know how to drill holes properly - it is not fun. The person who helped me was able to put it together in about 45ish minutes and I wouldn't have been able to do it on my own. FINAL SUMMARY: the motor lowers and raises the desk wonderfully it is very smooth, I like that the buttons need to be actually pressed so I never accidentally lower or raise the desk with my elbow/forearm in fact I never hit the buttons unintentionally at all. It holds two heavy monitors, a lamp, a laptop, a few books and would absolutely hold a lot more if I wanted it. I love it, but putting it together was not easy.

I bought this stand for my sewing room and it works perfectly. Lots of space and the lift up device is wonderful. If I get a kink in my neck, I can just adjust the height. I've had to for about 3 years with no complaints at all.