HgkekeCounter Pressure Bottle Filler Stainless Steel Bottle Filler Counter Pressure Beer Bottling Wand 60psi CO2 Gauge 1/4 & 5/16 Barb Homebrew Beer Bottle Filler Hand Held Bottle Filler 3ft Hose

I was disappointed at first only to find out that I was doing it all wrong. One must read the manual - works great!

Excelente producto. Y mas con precio y calidad. Es justo lo que esperaba

I have used this quite a few times now. I will also admit it is not smooth sailing every time, every single time. I have found first 1 gallon of a keg is bordering disaster. Afterwords works just find so long as you ignore one thing. That is the so long as you do not gas purge every bottle. Some reason the pressure pushes the fluid back into the keg and you have to get it going again, lots of foam. So once you purge the air and get a few bottles filled. The foam issues should go away so long you do not air purge. Or rather air purge and leave the pressurized air in bottle, bleed it out then fill.So can you find a better force carb counter pressure, sure. My question is why, just for a brand name or something? They all work just like this one will. Now chill your bottles and keep your beer or champaign like wine at a similar temp. Might even be a good idea if you can have a space to drop the temperature down to 60 degrees. I say this because eventually the solution and air temp difference become a problem.

funciona super bien, buena calidad de materiales

This product arrived in a good condition, no apparent damage to packaging or device. I spend some time getting all of my hoses cut and connected to the valves, had everything connected through a keg with starsan so I could sanitize everything before moving to one of three kegs I need to bottle for my sons wedding. Followed the instructions to find I didnt tighten my gas line enough, so had a small leak. Tightened and checked everything else, so should have been good to go. Turned the valve to the gas line, and nothing. the directions are clear and easy to follow, and I double checked everything.At this point I stated to troubleshooting everything, my gas and beer lines were good, took apart the filler all the way up to the three-way valve only to find that this was the issue, no matter the direction, it was clogged. Check to see if this was on backwards, removing the hand and twisting both directions, still nothing. Emailed the manufacture, but it is a sunday so haven't received a reply as of yet. In a bind, I have two weeks to get these three kegs bottled, so ordered another and will try again.Edit: the second arrived and worked for the most part. The bleeder valve didn’t hold the pressure, but is used to control flow. Customer support has been great and responsive, and provided another unit without question. The unit was easy to use and filled my close to 150 bottles.