GK GAMAKAY LK67 65% RGB Modular DIY Mechanical Keyboard, 67 Keys Hot Swappable 3pin/5pin Switch, Programmable Triple Mode Bluetooth 5.0/USB-C Wired/2.4GHz Wireless Customized Keyboard Kit (White)

Now I just want to say that this is my first custom built mechanical keyboard and this review may be long because I don't want to stop typing lol.My current setup:Personally Lubed Glorious Panda SwitchesGreen matcha keycaps with hiragana from Amazon4 layer tape mod on the PCBMicrofoam surgical Foam tape on the bottom plasticGlorious coiled nebula cableBuilding the board:Taking the board apart for modding was actually a fairly straight forward experience. The top case comes off by snapping it out of place and lifting it off of the bottom case. Then you unscrew a few screws to take off the plate and PCB from the bottom case. This is the part that usually trips people up though. While taking off the plate and PCB (which are attached by screws on the underside of the PCB), you have to be EXTREMELY careful so as not to destroy the mode selector switch on the back of the case. This part took the longest for me to do because I really wasn't trying to have to buy another board. Be cautious and take your time with this part if you are planning on modding your board. After taking the PCB out and not breaking the switch, I was able to start modding. I lubed my stabilizers and got them feeling perfect. Then I proceeded to tape mod the PCB by using 4 layers of masking tape. I know people generally use 3 layers but I was going for and extremely deep thocky sound. After tape modding the PCB I then applied hospital like foam tape to the bottom case to help dampen the sound even further. Used about 4 to 5 layers on this part. After applying my mods, I had to create holes in the tape on my PCB to allow me to be able to screw it back in. I was careful putting the mode selector switch back in place and all was well.Features:The board comes with MANY RGB features. I'm not a super fan of RGB in general but the mode I use kind of serves as a decent backlight at night. The three modes it comes with are nice to have. You can essentially connect up to 5 devices for this keyboard. 3 bluetooth devices, 1 2.4 GHz device and a wired connection.Layout:The keyboard layout is your standard ANSI layout so not much to say there.Functionality:I checked all the connections on the keyboard with a pair of tweezers before setting the board up just to make sure all the keys worked. They did. The rotary knob also works flawlessly and is really convenient when trying to change the volume of media. Even works on Mac.Connectivity:Connectivity is great on this keyboard. I have no issues whatsoever using the 2.4GHz connection on my MacBook Pro M1, BT on my iPad Pro and wired for my custom gaming PC. No dropouts or anything like that.Sound:Overall I did not try this keyboard stock because based on the reviews I watched it would have sounded akin to my corsair K65 lux that I finally retired after 5 years of use. I wanted nothing to do with the hollow sounds of a keyboard. I wanted something way more substantial and deep.My cost breakdown:This keyboard - $70Personally Lubed Glorious Panda Switches - $50 for 2 packsGreen matcha keycaps with hiragana from Amazon - $354 layer tape mod on the PCB - $4Microfoam surgical Foam tape on the bottom plastic - $7-8Glorious coiled nebula cable - $50Krytox 205g0 - $13Switch lubing supplies - $10Glorious Switch opener (I would not recommend this one) - $10TOTAL: $250 oof...Final thoughts:For $70, this keyboard is a phenomenal value. It is of decent quality and you can really make it sound like an expensive board. Now as you saw above this board cost me $250+ dollars to build and about 6 hours of build time. You're probably wondering why I turned a $70 board into one thats $250... Well that is because I had to buy all the supplies for it. I didn't have switch lube, I didn't have brushes, a switch opener, masking tape, keycaps, switches, etc. I was literally starting from 0. I also wanted a really nice coiled cable to go with the board instead of the one that was included. I didn't have to do any of this. A simple setup without lubing and starting from 0 can literally cost you around $130 with just the board, Akko switches, and $30 keycaps and possibly no mods if you don't have masking tape lying around. Even at $130 this board is still a very great value. I would HIGHLY recommend to anyone thinking of buying this to use for a build. Thank you for coming to my TED Talk lol.P.S. I ended up using Microsoft Power Toys to change the keybindings, because I didn't really trust the software that was recommended to use for the board.

My first fully custom built keyboard. With YMDK keycaps and standard red gateron switches. This keyboard works and sounds great. Finding the correct keycap set can be tricky with these size keyboards, The software to customize the RGB is not that great, I had a hard time working it and saving a profile. But the options are there to use macros and special effects. The build overall is very solid and feel.I was not able to get the Bluetooth to work, but I never have luck with BT, so probably on me. But the 2.4ghz connection works No Problem. I would recommend this keyboard to any beginner as its pretty easy, cheap and quality DIY keyboard.Keycaps - try to buy a set that is at least 180 keys and nothing smaller so that you will have the proper keys to fit everywhere, and the profile rows line up.

Great kit but make sure you have a 1.75u shift key that will fit. My ducky SA profile caps didn't work even though the shift was 1.75 there was slight interference with the case and I had to use akko ASA keycaps instead. Besides that it's awesome, the software could use better instructions (make sure you are in wired mode when you are trying to use the software or it won't recognize the keyboard) but once you figure it out it's fine and pretty versatile giving you some extra lighting options and allows you to set up macros and switch around what keys do what and choose what the knob controls. Also when looking for knobs most guitar knobs will work fine and you can also search for tm680 knobs on amazon and find a few. The green looks pretty good as well.Here is a picture after it's been all set up with akko lavender switches akko periwinkle keycaps and a knob sourced on amazon with the lighting set up to match the caps. One complaint about this though, there isn't a way to change the lighting on the sides of the board, not really a deal breaker but does kind of kill the look if you are trying to make everything match when looking at it from the side. Also the lighting around the knob is also unable to be changed, again not a deal breaker and it does serve a purpose (showing which mode the keyboard is in and also a low battery indicator) but still an annoyance when trying to match up everything. All in all a great budget kit in my opinion.Pros: Great price, media controls with the knob, tons of different color options, software allows for macros and custom layouts as well as custom lighting options, not the heaviest board by any stretch but does have a nicer weight to it than I was expectingCons: Certain lights cannot be changed, the plastic does feel kinda cheap, if you plan on modding you can easily break the mode switch when disassembling if you aren't careful, The right shift is 1.75u which isn't normally THAT big of a deal however the thickness of the case plastic next to it is slightly to thick making it unable to use certain keycap profiles such as SA thus limiting the options even further than normal.All in all I think it's a great value and the pros along with the price outweigh the cons of this kit, making it a great place to start of you are wanting to dip your toes into the hobby.