3pcs OEM Rear Camera Glass Lens Replacement for iPhone 13 Pro Max and for iPhone 13 Pro with Adhesive Preinstalled and Repair Tools Kit (for 13 Pro / 13 Pro Max)

Worked great. Appreciated all the tools. Would order again. Very easy but study up on some repair videos first.

Firstly, I’ve replaced the camera glass on some of my older phones and on the previous kits, the hardest part was removing the paper from the adhesive on the glass. On this kit the paper came easily off with the tweezers and it didn’t take the adhesive with it. I was extremely happy with this kit. Best one I have used so far The top camera glass on my lens broke due to my wedding ring accidentally tapping against it. I immediately ordered this kit. I have done this before so I knew what to expect during the repair process, I watched a ton of YouTube videos before doing this project to see how different people approach this repair. First step is the heat up the camera glass with a blow dryer for about 30 seconds, then to carefully insert the tweezers in the spot that has the chipped glass, start to pull up slowly on the glass and try to take it off in as many big chunks as possible. Be careful not to stab the tweezers into the camera itself! To get all of the glass on the rim use the knife and slowly scrape back-and-forth all the pieces off. Use compressed air to blow any debris out. Make sure all of the adhesive is removed before putting the lens on. Make sure your hands are absolutely clean, use rubbing alcohol to get oils off of your fingers before touching the new lens. With one hand, like you are doing the “OK sign gesture” hold the new lens between your thumb and index finger on the edges, and use the other hand with the tweezers to pull the paper off the adhesive. Once that’s done, install the glass with the tweezers and lay it inside the rim of the camera. It won’t fit perfectly at first so use the plastic tool to push it into place. Once it’s in place, press it for a few seconds, heat up the lens with a blow dryer for about 30 seconds, and press it again with the microfiber cloth for about 30-seconds to a minute. It will stick well. I thought I was gonna have to use b-7000 glue if it failed, but I didn’t have to. The pictures come out great, I didn’t have any specs inside the lens. I’m extremely satisfied. I will definitely stick with this brand solely because of the adhesive!!!!

I successfully replaced a broken lens on my phone, and the fit of the new lens was perfect. However, the installation process was not easy. First, I had to heat the area with a heat gun, making sure to cover the rest of the phone to prevent any damage. Once it was heated, I used tweezers and a cutter to remove the pieces of the broken lens protector (these tools are included in the kit). It's important to note that the camera beneath this protector is not glued in place, meaning it can move. Therefore, you must handle this area carefully. Additionally, some residues from the broken glass may have been left inside the camera cavity. I recommend shaking the phone gently and, if possible, using a rubber tool to remove any small debris from that area. Make sure to clean the ring thoroughly where the replacement glass will be adhered. Once you're confident it's completely clean, proceed with the installation. The photos included in the product publicity show which lens corresponds to each piece, as there are three different lenses. Once the installation was complete, my phone looked as good as new. As a precaution, I applied an external glass protector over the camera area to prevent any future accidents that could cause damage.

Easy installation Durability 8 of 10

I would have given it 5 stars if they had warned me the camera lens is made out of plastic and will melt with too much heat The instruction said to heat up the old lens cover and remove it - when I did that - the actual lens melted... A huge warning text would have been helpful I protected the other lenses and the phone from the heat and I was careful to avoid heating up the phone more than absolutely necessary But the actual camera lens is very sensitive... Apart from that the replacement cover was very easy to replace and fit perfectly

I’m glad I decided to do this myself. Saved me $$$. Definitely watch 1-2 YouTube tutorials if you’re not mechanically inclined like me. But overall it’s easy and works and now I don’t have to get a new phone. In the 1st pic I still have my phone case on but it shows the cracked lens. In the 2nd pic my case is off but you can’t see that it fit right on and looks good.

Doesn’t properly fit my phone 13 pro even tho it says it’s compatible. Adhesive wasn’t very strong

I bought this product because 2 of my rear camera glasses were broken( IPHONE 13 PRO) - what you’re gonna need : a heat gun or hair dryer & a pair of clear plastic goggles for eyes protection ( because you don’t want those pieces of glass to get in your eyes while removing them) -if it’s your first time , go on YouTube to watch videos on how to do it properly - fit well, great value for the money, easy to use

super yo misma le cambie el lente quebrado

割れたレンズを剥がすところは緊張しましたが、そのほかは簡単でした。 また割れたらこちらで書いたいと思います。

En general considero que el producto cumple su función. El proceso es relativamente fácil y tardé aproximadamente 40 minutos en la instalación de 1 cristal. Recomiendan usar una pistola de calor para aflojar el adhesivo de la cámara rota pero yo utilicé una secadora de pelo y no tuve problema. Asegúrate de quitar los restos de pegamento anterior para que el repuesto quede en su lugar. Las herramientas incluidas son útiles y de calidad aceptable, a excepción de la pequeña espátula azul de plástico que se ve en la foto cuya punta es muy frágil. El nuevo cristal parece tener buena adherencia. <Le falta un ligero tinte azul que tienen los originales> pero a simple vista es casi imperceptible. Tip: Busca tutoriales en youtube para que te des una idea del uso de herramientas e instalación. Si lo recomiendo.

great product