Two (2) UCP204-12 Cast Iron Pillow Block Mounted Bearings - 3/4" Inch Inside Diameter w/Set Screw Lock - P204

Exceptionally good value for the money these things are exceptionally solid, way to good of quality for the price paid, there is one thing though the grease nipple can unscrew fairly easy, but a little lock tight would fix that quick all sizes are the same great quality too youll probably notice i have ⅝ and ¾ there

I am not installing these on something extremely critical, so with that considered they are in absolutely fantastic deal for the price. They seem very well made, came with grease fittings pre-installed, and since I'm using them at maximum 5,000 RPM I don't foresee any issues.

Like the quality but I am unsure about the fit of a 3/4" shaft into the bearing and housing. Seems to tight and unsure if I should attempt to tap the shaft into the bearing with a block of wood. Seems like the 3/4" and 3/4" butt. Hoping someone responds to this question.

Purchased for a project. Needed bearings to fit a 3/4" shaft. The shaft measured 3/4" exactly. The bearings did not. They were too small. Had to return for a refund with no problems.

I've upgraded my rating.The castings and bearings appear to be well made, however the insertion of the bearing into the housing was initially of concern, but not an issue.One of the two bearings in this pack had the sealed bearing installed a bit out of alignment. The bearing is too tight to move by hand, so clamped it in a bench vice, inserted the shaft and was easily able to align the bearing (or remove it from the housing if I chose to do so).There are a bunch of videos showing how to remove/replace this type of bearing from the housing, so alignment is easy enough.The photos show how one of the bearings arrived, it was very easy to get the two bearings inline with each other. One image shows the bearing removed from the housing, showing grease chase and 2 grease ports in the bearing race.Grease zerk and dual Allen set-screws, very nice.Be sure to grease the bearings before putting into use!!!

Better than was expected. Great construction and feel.

I was using spare parts accumulated over years to assemble a push cart for gardening. Bearing for the rear axle was not an easy find at local hardware stores. This item was just the right stuff.

Good machined fit for medium to light duty. might serve as heavy duty but I cant attest to that.

OK

A+