Ergotron – HX Dual Monitor Arm, VESA Desk Mount – for 2 Monitors Up to 32 Inches, 5 to 17.5 lbs Each – Matte Black

It has very smooth moving joints. It also has a sleek design. The handle on the front for moving should be on all adjustable monitor arms. That said, I almost sent it back. Not because it didn't do the job, but because it was so relatively expensive. When I bout mine (Jan/2022) it was not offered in black. Only white and silver finish. I really wanted black. Hopefully it's offered in the black finish now. It's a great product. Is it worth the extra scratch? If the cost doesn't matter, go for it.

For years I have used lesser VESA-compatible arms to hold two 27-inch monitors. Trying a new 28-inch monitor, the weight exceeded the capacity of the old stand; that monitor sagged and could not stay vertical. The Ergotron HX Dual keeps monitors aligned while repositioning at will. Putting the HX Dual together is a two-person operation when attaching four screws to each VESA display. We did not find a "fix" guide in the instructions to indicate where and what to tighten to resolve specific issues. That would have been helpful for final adjustments. Bottom line: highly recommended premium arm for workstations to maximize productivity with two (or three if ordered) monitors.

I recently purchased an Erogtron computer mount to better align my two Apple Studio Displays over my dual monitor setup. While I have multiple Erogtron mounts in my home and office, I found this particular mount to be more expensive and time-consuming to align compared to the others. The mount is sturdy and well-built, similar to other Erogtron products I own. However, the alignment process was a bit challenging. The rotation alignment screws are located behind the monitors and are not clearly shown in the instructions, making it difficult to find and adjust them. It took me some time to get both displays even and properly aligned. Once installed, the mount does look good and holds the heavy Apple Studio Displays securely. However, the overall experience with this mount was not as seamless as I had hoped, given my previous experiences with Erogtron products. I would recommend this mount just set aside an extra two hours for proper adjustment.

Outstanding product build quality and very clean look. If you are looking at all the cheap options out there, don’t waste your time and money on inferior products, which I tried. I returned the cheaper alternative and made the investment in this. Glad I did. Adjustability is insane and function is second to none. Took me an hour taking my time to install knowing it was a keeper.

I bought this to hold two 28" monitors, and while it does hold them, it's nearly impossible to get the two monitors aligned and to keep them aligned. I have tried tightening everything multiple times, but no luck. Had big hopes for a $450 monitor mount, but what is the point if everything is wobbling. It's also very easy to move the monitors down, but a lot harder to move them up -- and these monitors are well within the weight limits for the stand. Overall just not worth it.

I have used this monitor mount for the past four years. I would not purchase it again. I've used it with several combinations of monitors and am currently using it with a 32" Dell U3219Q and a laptop tray. The good news is that the monitor arm itself is sturdy and holds a lot of weight. I've never had a problem getting it adjusted for any combination of dual 27" monitors, or a split between a 32" and a 27" monitor. Others mentions issues with tensioning, but that was not my experience. However, this is where the good ends. Here's the bad. 1. The VESA mounts that attach to the monitor and then clamp on to the mount rail are really wobbly. If you're looking directly at your monitor, and you imagine the motion you would use to rotate a monitor into a vertical orientation, this is the axis upon which the mount will wiggle a significant number of degrees. It's bad enough that when I press the menu button on the bottom of my monitor, the monitor rotates up and knocks the monitor out of alignment. The clamp needs to be shimmed or made flush with the rail somehow. This is very annoying. 2. The handle hangs pretty low below the monitors. It's intrusive enough that I may as well use a monitor stand as it prevents access to items below the monitors. 3. The cable management routing along the monitor rails is not sufficient for newer monitors that have embedded KVM switches or large USB hubs. The cable routing solution does not adequately hide all of the device cables coming out of the monitor.

Easy to assemble with sturdy metal arms and easy to adjust common screws. Excellently designed.

This mount is perfect for my 2 32" LG Gaming Monitors. The adjustability is awesome and it stays where you put it. Very expensive compared to other monitor mounts but worth it.

J’ai utilisé des produits hautes gamme Arctic et j’ai retourné tout. J’ai vu Ergotron et je me suis dit « ou la le prix. Je vais vous dire que des que j’ai ouvert la boîte j’ai jamais pensé au prix. Le produit est sublime et chaque pièce parfaite. Les mechanisms, les pieces et l’attention au détail. Je voudrais remercier Ergotron pour ce produit car je vois qu’ils ont laissé les ingénieurs faire leur boulot. J’ai mis deux écrans MSI et j’ai la possibilité de mettre un troisième si je change la planche qui garde les écrans. Je peux mettre une avec trois si je veux et ça c’est bien. Je voudrais souligner deux choses avec ce support. Si votre table de bureaux est IKEA comme la mienne et epas trop solide car on a deux pieds, vous allez avoir des choques transmis par cotre clavier dans la table et dans le support. Les écrans peuvent bouger si vous réglez pas la tension et vous donne pas du support au bras avec le mur. Par example le mien est installé comme ça :/| et pas comme dans le videos ou vous voyez le bras comme ça. Deuxième chose, si vous avez un petit table vous allez avoir les écrans trop proches et il faut mettre le support comme ça /| ou |\. Dans cette position vous pouvez pousser le support vers le mur et avoir stabilité extra pour prévenir les choques du clavier.

Very expensive, but worth every penny. Every piece is well made and feels very premium, and super sturdy after mounted to the table. I’m sure this thing will last for a very long tome so it’s a good investment if you need to spend a lot of time working in front of computers.

Geen aanrader. Het in elkaar zetten van de monitorarm verloopt stroef. Voor 400 euro voelt dit heel goedkoop aan.

Wie in anderen Produkrezensionen bereits beschrieben sind viele von dieser Monitorhalterung absolut begeistert. Trotz des für mich anfänglich hohen Preises habe ich mich dann entschlossen, diese zu bestellen (Produkt für 2 Monitore bis 32 Zoll). Das Paket mit stolzen 11 Kilo wurde in einer zusätzlichen Umverpackung geliefert, um das Produkt zu schützen. das finde ich gut. Beim Öffnen des Paketes offenbart sich die ordentliche Qualität des Peruktes. Ich bin sehr pingelig und habe jedes Bauteil genau untersucht. Nicht der kleinste Makel lässt sich erkennen und das Gewicht und Verarbeitung der einzelnen Arm-Bauteile lassen mir ein Wow entgleiten! Für mich ist das Qualität auf dem höchsten Niveau. Die Anleitung zum zusammensetzen der einzelnen Bauteile ist auf mehreren DIN A4 Seiten gedruckt und großzügig dargestellt. Alles ist klar erkennbar und der Zusammenbau verlief ohne Probleme. Hervorragend finde ich, dass die einzelnen Schraubelemente gruppiert in mehreren Tütchen verpackt ist und der Inhalt mit der genauen Bezeichnung deklariert ist. Ein Verwechseln von Schrauben und Verbindungselementen ist damit völlig ausgeschlossen. Das erlebe ich so nur selten. Nach dem zügigen Zusammenbau und das Anbringen der Monitore neigt sich der Arm nach unten. Was ist das denn? Meine Monitore liegen mit der Hälfte der Belastung unterhalb der Belastungsgrenze. Nach einem Blick in die Einleitung weiß ich auch warum: Es gibt mehrere Stellschrauben, mit denen man perfekt alles auf seine Bedürfnisse einstellen kann. Ich bin selten so begeistert von einem Produkt! Bedenken hatte ich, ob die Halterung mit gut 10 Kilo Plus zwei Monitore mit jeweils 5 Kilo auch mit einem höhenverstellbaren Schreibtisch genutzt werden kann oder der Motor des Schreibtisches sich weigert. Funktioniert mir dem Schreibtisch von Ikea Idasen wunderbar. Diese Monitorhalterung kann ich uneingeschränkt empfehlen und ist jeden Euro Wert! Ich würde gerne 8 Sterne vergeben, geht aber nicht ;-)

I was hesitant to spend so much on monitor arms but when you want 2x 32" curved monitors on your desk without the cumbersome stands using up all the desk space you don't have many other options. Assembly was a bit of a pain and not helped by the instruction manual leaving out a very crucial step about inserting bolts at the back of the balancing arm. That said, Ergotron support was really good. Even though the first line support was basically clueless and not comprehending what I said nor the pictures I provided, the follow-up was among the better customer support experiences I've ever had. That out of the way, it is a joy once assembled. It takes up a bit more space than I would have liked and it's annoying that you cant rotate all the way back and forward (so it takes up more actual desk space than I'd hoped instead of mounting at the edge and keeping the arms mostly behind and off the desk top), but it holds 2x 32" monitors without breaking a sweat. Calibrating is very straight-forward and being able to move both monitors up, down and around as needed is a breeze. You really need a solid desk to mount this. I have a 38mm thick solid pine and the desk mount puts a visible strain on the desk so I added a stainless steel plate in between the desk and the clamp to help distribute the pressure. At the end of the day it lives up to its promises and leaves very little to want. I will eagerly buy more Ergotron mounts in the future as the office expands.