Senlesen Matte Black Free Standing Tub Faucet Floor Mounted Tub Filler Faucet Brass Bathroom Tub Faucets with Hand Shower

Muy bonita y de mucha calidad. Al ver reseñas dude y cuando llego note que la parte superior era muy pesada en comparación del tubo. Hice arreglos para fijarla mejor pero al final no fueron necesarios funcionó perfecto

Small hiccup on delivery that seller rectified instantly. Thank you and Merry Christmas. Tub looks great...now to install taps!

This is a beautiful faucet and sprayer. All metal (except for some of the hand-sprayer) and it works well. As you can see the instructions are almost worthless and they did not include which of the two holes in the faucet are hot and cold (plus it isn't marked). I wish they would have applied a sticker or something that would explain which hole is for the hot water line and which is for the cold. I learned that the cold inlet is closest to the front (nearest the diverter's square knob) and the hot inlet is closest to the rear. I noticed some people had a hard time removing the plastic piece that will protect the faucet in shipping and from debris. Mine simply came right off after removing the 2 black plastic bands and pulling the white plastic piece away from the faucet. If you're a DIYer like me this is pretty easy and I don't think you need to hire a plumber (but don't hesitate to do that if you are not up to the task). If you decide to take it on yourself, please let me give you a few tips on the installation. The system should be built from the ground up, connecting the facet last. Here are my notes for a new installation. This list is FAR better than the ones provided. Obviously, if you are replacing an existing system, you will already have the water supply off as noted in step 9, before removing your existing system. 1. Screw the floor-mount bracket to the bottom of the pole (don't mount it to the floor yet). 2. Run the provided water lines inside the pole with the long metal ends at the top where the allen wrench screws are. I used a pencil and some rubber bands on top to keep the water lines from falling out. 3. Attach the screw-on floor mount to the pole making sure water lines feed out the bottom past the floor mount. 4. Potion the pole so that it is closest to the rim of the tub without touching it and the allen screws are facing the rear, mark and cut a hole in the floor using a drill mounted 2 inch. hole saw, then attach the mounting bracket to the floor. Note: I did not use their screw/bolt below screws they provided, but instead I used 3, inch and half long wood screws with washers on the ends (super easy). 5. Position the faucet so that the hand sprayer is on your left and the hot/cold handle is to your right (as you're facing the tub). Connect the faucet by inserting the long metal end of the cold line to the faucet's front-facing inlet, closest to the square diverter knob, and use a wrench to tighten. This may require 2 people (one to hold the faucet and one to attach the water lines). 6.. Repeat step 5. for the hot line in the faucet's rear-facing inlet. 7. Attach faucet to pole using provided allen wrench to tighten 2 allen screws. 8. Connect the hand sprayer to the faucet (hand-tighten as hard as you can is all that should be needed). 9. Turn off the water source and connect provided water lines to your water supply (use provided brass connectors and optionally the 2 provided extension lines if needed). Note: I did not use the provided extension lines as they were not needed. It is also a good idea to add shut-off valves to the 2 supply lines if you do not already have them. 10. Once attached, turn the water back on and inspect for any leeks as you test the faucet and hand sprayer. I hope that helps.

This product definitely looks good and seems solid. it will certainly give a better look to your bathroom. the way the water comes out of the spout just looks great. pros: looks good feels good cons: not really easy to install the shower head has to be wiped from water after usage the hot and cold connection are inverted compared to the dotted colors on the tap even if it's not the easiest to install at the end of the day it works and looks really good this product gets an average of B+

J’adore pour le prix ça valait vraiment la peine sauf que la peinture sur le tuyau de la douche téléphone est en train de partir après moins d’un ans mais rendu là c’est pas grave versus le prix en magasin