RUYUFEHeavy Duty Lid Support Hinges Soft Close Folding Lid Stay Hinge, Keep Lid Hinge Open, Perfect for Cabinet, Kitchen, Wardrobe Toy Chamber Max Support 50lb/2pcs

Installed in a high reach cabinet with a lift-up lid and the support feature worked well and was easy to adjust. The instructions use metric measurements and rely on photographs that have not printed well, so buyers need to refer to the photos on this listing as well. Referring to my picture, converting the measurements to inches, the distance from the pivot point on the smaller anchor to the top of the lid is approx 7-inches (I used 6.75 inches which worked best for my situation). The other anchor point is close to 4-inches from the top of the cabinet. Take care when situating the anchors such that they do not interfere with the cabinet sides and top. I used 3/4-inch clearance for 1/2-inch wooden construction. Adjusting the friction at the hinge point enables the lid to stay horizontal until light pressure on the lid for it to softly close. I found that the last inch of closure happens much more slowly. If the friction adjustment is too low, the lid may stay horizontal for a few seconds before closing quite quickly, so take care in fine-tuning the friction. For the price, this is a good product. I have found gas strut versions to be slower closing than this yet have a more predictable operation but are not as adjustable as this one is.

We wanted it for a heavy toy box lid. It was useless, and so we returned it. Instructions provided were very poor.

The product design allows you to switch up how you install it, depending on your needs. Installs right or left side and has adjustable tension.Opens and closes with ease, but I also bought a magnet for the top to ensure that it stays closed.I likely will never test the 50 lb max weight capacity since I only have a coffee maker and air fryer in the cabinet.The instructions aren't very clear, so be prepared to use some creativity at times. The measurements provided on the instructions would not have worked for my project. I ended up using a level + square to find the measurement length for a 90 degree angle.

Works great on large wood toy box.

We bought to put on a toybox my husband had made our kids. First off, the instructions included in the packaging are TERRIBLE. We had to use other reviews on the product to figure out how to install them (and my husband is very construction savvy). Once they were installed (using both) trying several different tightness levels, the lid would slam shut. When we put it as tight as it would go, it would stay open and you would have to press firmly for it to start to soft close, then at about halfway closed it would pickup speed and slam close. Absolutely terrible. We are returning this product because it doesn't work.