Single Monitor Arm Desk Mount with Gas Spring, Height Adjustable Monitor Stand for 13–32 Inch Screens up to 20 lbs, VESA 75x75 & 100x100, C-Clamp & Grommet, Sit-Stand Desk Compatible

Excellent monitor arms, they are sturdy and well-made. I have had them for about 8 months now and they really check all the boxes. They articulate forward, back, up, down, and swivel well over 180 degrees. They were easy to install and you can reposition if you need to without hassle. I have two 24 inch monitors which is plenty, I feel like two 30 inch screens would be total overkill. I used to have a 49 inch curved monitor and it's just too much. I actually have two individual arms, one for each monitor. Mount-It offers a a dual-arm model, which I returned because that setup requires that each arm share a base, which greatly limits how you can adjust and configure the monitors. For example, the arms cannot be configured flush with the wall with the dual-arm model. Also if you adjust the height downward, the monitors will separate. In order to keep them together (side by side) as you vary height, you need each of them with their own arm so you can have enough space between each base. If you have two monitors, I would get two arms.

I have very heavy monitors at work. I have tried and failed to get good stands in the past. I bought a similar model, but for 30 pound monitors that worked awesome. So I decided to get this single arm version for my home monitor because I only have a single 23 inch monitor. So I got the lighter arm. However, this is not a cheap product. It is heavy duty steel, and is easy to put together. I’ve only used it for a couple weeks at home, but I’ve been using the dual arm monitor at work for several months. In both cases, it is working great! I highly recommend this product for correctly sized monitors. Please make sure your monitor is not too heavy, and when you get it, definitely read the instructions carefully so you can properly balance the spring in these arms.

I have 2 of these mounts 1 black and 1 silver. 1 has a 32" Samsung odyssey g5 and the other a 27" msi monitor. The arm tension is easily adjusted on the and goes up high enough to support both monitors without any bleed off over time. Adjustments are easy as far as height and left to right movement. The only issue these really have is the monitor up and down pivot. You have to tighten them pretty tight to not have the monitor tilt downwards and at that point its hard to pivot the monitor without loosening the bolt again. You can force it but it takes some effort. The clamp mount for the desk works just fine I used 3m automotive molding double back tape to keep the mounts from moving once in desired position some on the base of mount and some on the top of metal compression pad they are rock solid. For the price I can't complain.

I've had the Mount-It! dual arm mount for quite some time, but I decided I wanted to go in a slightly different direction as the one downside to the dual mount system is an inability to adequately line up monitors with different bezel sizes to my liking. This is no fault of the previous mount, just me being a bit mildly OCD about getting my screens lined up. I also figure to be adding screens in the future so I wanted to try and find something that was a bit more flexible. I put this up against the Vivo single arm mount to see if one was better and this one is pretty good. It's easy to put together and easy to install a monitor to it. Rather than try to attach the monitor to the VESA mount while attached to the arm, this one has you attach the mount to the monitor, then slide it into a retention clip on the end of the mount. This makes placing and removing the monitor extremely easy if you need to make any adjustments to the actual monitor arm on your desk. The whole arm feels very sturdy, much more than the Vivo did and is able to hold much larger and heavier displays. It can hold up to 32" monitors, including ultra wide monitors as long as the weight doesn't exceed 20lbs. In the weeks since installing this arm, there has been no sag at all. The only issue I've encountered is there's a fair amount of shaking when even just typing, although I attribute this more to the desk not have a ton of support in the front. Either way, it's there and it's noticeable, particularly during extended typing sequences like this. So far that's the only drawback that I've encountered and again, could just be the desk. Overall, it feels very solid, holds my 24" AOC monitor up with no issues, and is definitely worth the price you pay for it.

I bought a monitor arm from Mount-it about a year ago and have had no issues, so I thought I would give them another go and have not been disappointed. The arm has a decent reach and easily holds my 27" monitor. Its range of motion is good and hasn't required any re-tightening. The assembly takes some work, but with average DIY skill a person should be able to put one of these up in 1/2 an hour. IT DOES NOT COME WITH M4 SCREWS. You will need those to attach a monitor to the arm. M4 screws can be found at most hardware stores. The arm came with wall and desk mounting brackets. Mount-it instruction sheet was easy to understand and very helpful. This is the best monitor arm I've found in this size. The value for you dollar can't be beat.

My 34” ultra wide Samsung monitor is at the upper limit of weight this arm I specified for but it holds it just fine after adjusting. Repositioning the monitor seems easy enough if needed. Arm holds the tilt fine. My desk is about 1” thick and clamping the arm isn’t a problem. Also comes with hardware to mount the arm through a hole in the desk. Cable management works well to keep things tidy. For my personal taste, I like how this arm doesn’t have visible branding. I was debating between this arm and another at 2x the cost. Glad I got this one. It does what it’s supposed to and holds a large monitor without an issue.

This looked like a solid product, however when I mounted my new 9 lb monitor it sinks to the bottom. We used the hex key to adjust and it will not move apparently it was stripped. I have tried for three weeks to get a response from the company with no avail and now it is outside of the thirty day return. $80.00 down the drain how disappointing!

Has a good grip on the table, I thought the little felt nubs weren't enough to stop the mount from carving marks into the table but I was wrong. No marks to be seen. The swiveling functions to have limitations though, so plan on how you want to use the full range of movements(eg play around with the arm and imagine how the monitor will move together with it) before putting the monitor on. Some of the wires will hide nicely inside the mount's cable runs but to get the best aesthetic I suggest either cable ties/covers or running the rest of the cables under the desk. Solid steel construction.

Product worked exactly as described. I mounted a Dell 4K 27" monitor to it and have had no problem whatsoever. I used the grommet mount which was easy to install. I only use it in landscape orientation, but it does rotate easily into portrait orientation.

Very stable for holding up a 24" Acer predator monitor

Excelente producto y una súper atención

I have a 32" screen and it's held up perfectly.