Speaker Wall Mount, Surround Sound Speaker Stand with Adjustable Swivel Tilt Angle, Bookshelf Speaker Wall Mounts for Living Room, Home Theater, Hold Up to 55 Lbs, (SWM201), 1 Pair, Black

Really like these speaker mounts. Sturdy, easy to install and unobtrusive. I mounted a pair of 11-pound speakers on them. Did not have to mar the speakers with screws. The side panels on the mounts tighten up such that the speakers stay put without screwing them to the mount. A good value. The only slightly marginal thing is the decorative plastic piece that hides the hardware attached to the wall. At least on my wall (wood panel) it doesn't fit tightly. Looks fine though, and nobody would notice unless they were actually fooling around with it.

This item is perfect for almost any size speakers. Very sturdy material. The design works well and it’s not bad looking. The movement is very simple and the adjustment is nice but I didn’t used it too much.

Great Speaker wall mounts really durable and sturdy using a pair of klipsch bookshelf speakers. Adjustable arms for any size speaker easy to install. I had some issues with my package but amazon resolved it quickly. Must get for every home theater audio system

These are great speaker mounts. I recommend these even in the face of the following [somewhat questionable] complaints: They were very easy for me to put together, but I have a great concept of three-dimensional manipulation and am quite dexterous. There are a lot of things you have to hold in place with your fingers before being able to bolt it all together. They're heavy for their size and an odd shape, which may make assembly annoying for some. The plastic plates which cover the mounting bracket aren't affixed to the frame in any way. Bass frequencies cause these to slide along the frame, and thus off the wall, very frequently. Even when just listening to spoken word. I'm sure some sticky tack will fix this, but I have none on hand. The second picture in this review highlights this issue. There are holes in the frame through which one can run speaker wire. This is a great feature, but unfortunately while these holes are large enough for speaker wire, they are too small for speaker cables and power cables. I am using powered speakers, so these holes serve me no purpose. The acorn nuts protruding from the base of the mounts lend an industrial aesthetic; which is not in my favor, but only a concern now that I am inspecting the items for this review. They're not horrendous, just make sure you don't scratch the black paint off of them. I wish they had a higher range of motion. In the first picture for this review, they are tilted down as far as they go. Due to the size of my monitor, and wall studs being 16" on-center, this was the only place I could install them. They are aimed slightly above my head; which is not ideal for music production, but works perfectly fine. All in all, this is a great product. Even though there are certainly better options out there, I would recommend these to anyone simply for the price and build quality.

These work well with Micca OoO speakers. I ended up using my own stronger anchors to mount them instead of the included ones and they won't move at all. They are small and non-intrusive but strong and well finished. Recommended.

I needed bookshelf speaker wall mounts for the speakers I recently bought for my record player. These mounts are sturdy, well-made, and worth every penny. They were easy to install and look fantastic on the wall, perfectly complementing my setup. Highly recommend for anyone looking to securely and stylishly mount their speakers!

I needed something to mount a pair of Paradigm 100s for the rear channels. They mounted well. I get no vibration and I have even hit my head on them a few times and they feel solid.. I'm sure they could also be very good in other positions as well. I also liked the tilt feature since I did mount them higher. Be sure to check your angles to make sure these will tilt enough for some setups. I just need about 5 degrees.

These WALI bookshelf speaker wall mounts were purchased for a large set of Klipsch RB-61 reference bookshelf speakers. These speakers are 12.3" (D) x 8.5" (W) x 15.4" (H) and weigh about 35 lbs. per pair (~18 lbs. each speaker). Selecting a wall mount that could support their size and weight was a concern. I didn't want to get something that would bend or pull out of the wall. I also didn't want to install support screws into the side of the speaker to ensure it stays on the wall mount. These are brand new speakers, and I wanted to keep them that way. After careful research of all mounting brackets on Amazon, I decided to purchase the WALI brand mostly due to the positive reviews. I'm very happy I did! The mounts came yesterday, and I immediately installed them. As others have commented, they do need to be installed in wall studs. Hardware is supplied for mounts into wood and brick. They do not accommodate mounting into metal studs or concrete block. You probably can, but you'll have to provide your own mounting solution. Mounting the speakers was straight forward. Use a stud finder to locate the stud, place the mounting plate on the wall location and mark the holes, drill small pilot holes, then screw the plates into the studs. The plate has two screw holes for the provided wood screws. One is high enough to use an electric screwdriver/drill to install the screw. The other screw is very close to the support arm. My drill was too large to drive the screw next to the support arm. That screw had to be manually hand screwed. For this reason, a pilot hole is necessary for at least the mounting hole by the support arm. One thing I was very pleased to see was the way the speaker is held on the mounting bracket. An adjustable screw is provided on each speaker clamp, one on either side of where the speaker will sit. Tightening or loosening these screws moves the clamps in and out. So these clamps use pressure to hold the speaker. After I installed the mounts to the wall (which took about an hour), I placed a speaker on the mount and tightened the clamp to find it held beautifully! Even with 35 lb. speakers, the clamp was tight enough to hold the speaker with no problem. My speakers are mounted relatively flat, pitched slightly down. Even though the clamp has screw holes where screws could be driven into the sides of the speakers, I found this wasn't necessary with my installation. The screws for this, by the way, are provided with the speaker mounts. If you need to install them with the added screw support, you don't have to purchase the screws. I'm very pleased with this product. The supports are made with good quality, thick metal, all the hardware is provided, documentation was adequate, and our speakers are held firmly in place. Best of all, the price is excellent. What more could I ask for?