WARN2000 DC Utility Winch, 92000

Me encanto la forma en que trabaja y súper fácil instalación

Pulls tree roots and small stumps with ease.

Bon treuil avec un excellent rapport qualité/prix.Le treuil n'est pas très rapide mais il fait le job et tire bien sans forcer. Le vendeur est très sérieux, sympathique et très réactif. Le vendeur donne également de précieux conseils d'utilisation. Le vendeur concerné est "JDS1976"

i read the directions, and you have to stretch and tight wrap the cable starting from 5 wraps, on spool. I used 6 ga wire from idling 14.6 volt battery 16 feet away to crane, and 6 ga wire to frame grd with additional grd cable to frame from battery. OE pickup wiring is not good enough for something like this. I haven't taken an amp reading sorry:( I stretched the cable by attaching winch to tree and having crane pull pick up to tree with brakes applied and it pulled very hard, but during free spool it still unwraps easy. I used it for at least 3hrs straight of heavy lifting and dumping. I bought a NATIONAL snatch block used for soft rope and it worked, but i cut the side off of the shiv. I found a quality superwinch brand snatch block at Runnings farm store, for 14.00. will use it from now on. During winching as the cable wraps up the gear ratio gets higher, making the pull harder. This is my first winch, and i should have bought one years ago, my back would be better, that is the sole reason i bought this in the first place, because i know several big strong guys that have done a lot of heavy work and also have had at least one back surgery. If you are thinking about moving heavy stuff and that a winch would take too much time, think about lifting 10lbs or less for 6 months while vertebrae heal from three surgeries. Just think about that, is a 100 dollar winch and a truck crane too much? The other thing to calculate if you don't have things is tackle for the winch, some choker chains, clevis', shackles or d rings. I had steel laying around and made a crane, and bought the beam, it was 60 inches long with a 4 ton jack positioned less than 12 inches from the pivot and i lifted at least 450 lbs with no problem, and i had odd angle drag/pulls (ruining snatchblock) that worked well starting from 1/2 spool ratio to full spool ratio and the motor rpm slowed maybe 10%? I have a tool bag to store it in. Lifted rider mower, snowblower, big block engines (425 455 OLDS), and trees. will buy again if it fails and i can't fix it. If the control fails one dpdt momentary toggle switch with furnace thermostat wire will take its place, for cheap and very durable repair.

Looks good for my roof tinny boat