2 Oz - BLI101 - Aerosol Black Laser Ink for Metals Marking - CO2 Laser - Fiber Laser - YAG, Durable, Permanent, High Contrast, Brilliance Laser Inks

2 Oz - BLI101 - Aerosol Black Laser Ink for Metals Marking - CO2 Laser - Fiber Laser - YAG, Durable, Permanent, High Contrast, Brilliance Laser Inks

Q: Will this work with xtool D1? 10W

You will need the IR laser module in order to do metal, but yes this will work. With that having been said you should watch a few videos on your xtool specific to metal not only to see the process but to get some ideas for what they are using (cleanup and all). Have a good one.

Q: will this work with a diode laser with 5.5w output?

Our recommendation is 25 watts minimum for CO2 laser and 10 watts minimum for fiber laser. I encourage you to try out with your laser type and if it doesn’t work reach out to me and I will refund your money in full. And if does work then I will send you another one for Free if you share your settings going forward for other customers. Thank you Grover

Q: Does this work on brass?

It works on some variety/grades of the brass, Brass being good conductor of heat, you may have to slow down the speed at 100% power. But make sure brass doesnt warp, it may happen if the metal is too thin. Also try to put a flat piece of wood which may help to contain the required heat. As its a combination of heat, frequency and wavelength etc. for it to work on metals. Good luck, don't hesitate to contact the manufacturer for their excellent tech support .

Q: I have a 30 watt fiber laser, engraving on stainless steel and tungsten. should i use the same settings i normally use when engraving these metals ?

Please check out our website FAQ page for starting guide line settings for Fiber laser or call our tech support department and someone can help you in details with you application. For quick reference, please see below settings as a starting point. Thank you Fiber Laser: Power =10 Watt Speed = 50 mm/sec Q-Frequency 200-500 (500KHz gives the best result, But some fiber lasers only go up to 200 KHz) Hatch or DPI = 0.1 mm

4.1/5

Product ID: 292870091

Secure Transaction

Details

Brand
BRILLIANCE
Package information
Tin
Paint type
Spray
Item volume
2 Fluid Ounces
Manufacturer
Brilliance

🖤High Contrast Ink

⏱️Fast Drying

⚙️Nano-Particle Tech

Frequently Bought Together

Brilliance Laser Inks 2 Oz Aerosol Black Laser Marking Spray for High Contrast Metal Marks | Permanent and Durable Metals Ink for Fiber, YAG, Diode, and CO2 Laser Engraver

Brilliance Laser Inks Ceramic and Glass Black Marking Spray - 2 Oz Aerosol Marks on Ceramics and Glass. Aerosol for Fiber, YAG, Diode, and CO2 Laser Engraver Machine, BLI420

Brilliance Laser Inks 2 Oz Laser Marking Spray - Copper Tone Red, Permanent High Contrast Metal Engraving Aerosol for Fiber, YAG, Diode, and CO2 Laser Engraver Machine, BLI202

Description

🎨 Mark Your Metal Masterpieces with Brilliance!

QUICK DRYING FORMULA - Achieve dry designs in minutes, or seconds with heat!
EFFORTLESS APPLICATION - Experience clog-free spraying with our anti-clog technology.
UNLEASH YOUR CREATIVITY - Transform metals into masterpieces with our innovative ink!
VERSATILE COMPATIBILITY - Works seamlessly with CO2, Fiber/YAG, and Diode lasers.
LIFETIME SUPPORT GUARANTEED - Enjoy peace of mind with our free tech support!

The BLI101 Aerosol Black Laser Ink is a cutting-edge solution for metal marking, featuring advanced nano-particle technology for a consistent spray, high contrast black ink, and compatibility with various laser types. It dries quickly and is easy to clean, making it ideal for professionals seeking durable and intricate designs.

Specifications

Manufacturer	Brilliance Laser Inks
Brand	BRILLIANCE LASER INKS
Model Number	BLI101MBAS02
Package Dimensions	20.4 x 7.7 x 4.19 cm; 91 g
Colour	black, Black
Number of Items	1
Size	59 ml
Ink Colour	Black
Manufacturer Part Number	BLI101MBAS02
Item Weight	91 g

Have a Question? See What Others Asked

Will this work with xtool D1? 10W

will this work with a diode laser with 5.5w output?

Does this work on brass?

I have a 30 watt fiber laser, engraving on stainless steel and tungsten. should i use the same settings i normally use when engraving these metals ?

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Reema J.

Perfect platform for hard-to-find items. Delivery was prompt.

1 month ago

Khalid Z.

Great experience from order to delivery. Highly recommended!

1 week ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving over 300 million shoppers across more than 200 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

One-Time Purchase

A$112

Duties & taxes incl.

Australiastore

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Vikram D.

The MOLLE sheath is of exceptional quality. Very happy with my purchase.

2 weeks ago

View all Trustpilot reviews

About Us

Customer Services

Customer Support

Regional Access

Legal & Policies

Social

Get the App