05345290001 2050 PH Screwdriver for Phillips Screws for Electronic Applications, PH 000 x 40 mm, Black

I needed to exchange the hard drive on my laptop. The screws on the bracket were very small and they were locked in tight. I tried to use a cheap eyeglass set I've got, but the screws wouldn't budge and there was the real chance the grooves would strip. If that happened, I was sunk. So I ordered this screwdriver. The cost was a little off-putting, it costs more than some sets here on Amazon that have multiple sizes, but in the end it was worth the price. The machining of the tip was fine precision. The metal was strong and sharp. The handle is comfortable and allows you to turn stubborn screws. It did the job I needed with no problem. If you look at the pictures, you'll see how it is what you'll need for small screws. The first picture shows the bracket. The second is securing the hard drive with the bracket. The third is with the case screw, and the last is a comparison with a couple of smaller cheap screwdrivers and you can see the difference. This tool gets an enthusiastic recommendation.

As a Model Builder/YouTuber you need tools that work and won't let you down. These Wera Screwdrivers have been by far the best I've used. Their small size, ability to rotate in your palm takes these from great to amazing! They hold their magnetism for a very long time and work great for the itty bitty screws I use on certain model builds. If you can order the Wera Advent Calendar you will get a great deal on a whole line up of Were screwdrivers and tools. I wouldn't recommend paying out the nose for these, but if you watch for them to go on sale, snatch them up while they are available because they do go quickly. I definitely plan on purchasing the full Wera Screwdriver Set next time I see it on sale.

Bought this for my DJI mini pro 4 drone to change propellers. This triple zero size is perfect and the professional grade tool will save you from stripping screws and doing a quality propeller change.

This is perfect fit and size for the Neo2 on the motor mounting screws and propeller mounting screws. It is also perfect for the transmission module screws.

Perfect screwdriver for what I need.

Excellent screw driver but I wish the image be more accurate. I purchased this screw driver because I need to access the screw placed in deep hole of 2mm diameter. Unlike the image shown, this product has 2mm diameter only for a half inch from the tip.

I bought this screwdriver mainly because I wanted to clean out my old GPU graphics fan assembly, but the biggest obstacle was the 4 tiny screws (see pictures) holding the bracket behind the GPU Chip. I tried the "jeweler's set screwdrivers" they just don't seem want to grab on to the screws or really transfer the torque onto the 4 screws, and I really did not want force it. The graphics card pictures you see is my ATI HD6870 GPU card, and the screws on the back seems to be about 1.5mm in diameter, and I debated between getting the ph#00 or the ph#000, but in the end decided that I think PH#000 was the best choice. The next choice came between either buying the this one, or the WIHA 26102. The problem is the Wiha listing for PH#000 on Amazon seems to display PH#00 picture instead of the PH#000, so I decided to buy this one, because I didn't want to get the wrong one. As soon as I put the screwdriver to turn those 4 tiny screws, they turned and I knew I made the right choice. the tip seems to go in deep and did not "fill-out" the entire screw, which led me to question whether PH#00 would have been okay, but I still felt this was the right choice. Once I was able to get the card open, and looked inside the cooling assembly, this screwdriver also was absolutely needed to remove the 3 screws that mounted the base of the squirrel fan onto the black metal heat sink that was screw onto the card, which you can see in the picture. After the properly cleaning of the cleaning assembly and reassembly process, when I tested the card, it was running at between 37-40c at idle (at 20% fan speed), and 50'c (watching youtube etc), but I am very happy with the outcome because there was enough lint and obstruction in there that otherwise would never have been reachable without the disassembly process. Overall I am very pleased with this.

This screwdriver is great! Just after the order was delivered, I used it to repair a watch which featured very small screws. The screwdriver worked flawlessly. The screws were taken out and then returned without any stripping, looking as good as new.

Bonne qualite

Perfect micro Phillips head screwdriver for electronic equipment that fits perfectly and does what you expect.very good quality and I expect this to last!

Fits well in the propeller screws for the DJI Mini Pro 4! Much easier to remove!

Era o tamanho que procurava para concerto de celulares

Magnífica herramienta.