Aaron 4Pcs 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code (Resistors get very hot during working)

As advertised, they work great to eliminate the hyperflash after installing LED turnsignals.

Likes:- Resistors have a large heatsink but are still compact enough to install in tight spaces- The wire gauge and the insulation on the resistors are thick and durable- The wire clamps that were included worked great in making contact with the wires on my OEM turn signal harness- The resistors are non polarized so they work when installed in either orientation- I touched them while they were on and they did not get as hot as the warning message claims- They eliminated the hyper flash on both my front and rear LED turn signals back to normal flash speedsDislikes:- Initially when I first installed one resistor on my rear turn signal harness the hyper flash still existed, so I wired a second resistor in parallel with the first one and that did the trick and the hyper flash went away. FYI, I did not need to install a resistor on the front turn signal due to space constraints behind my front bumper, to summarize I used two resistors on each turn signal in the rear of the vehicle- The wire leads coming from the resistor are a bit short, I would have preferred them to be a few inches longer- No self tapping screws were provided inside the package so I used Gorilla Mounting tape to stick the heatsinks to the bare metal on my rear bumper frame, this is not ideal but since the resistors didn't get very hot I am not concerned about them melting the adhesive tape

تعمل بشكل جيد منذ سنتين

Excelente producto y de buena calidad, super fácil de instalar buen producto. ! ! ! Lo recomiendo mucho este tipo de resistencia. ! !

As described, works well