Xcel Home™ 2 x 10mm x 1/2 BSP (500mm) Flexible Tap Connector | DIY Repalcement Boiler/Kitchen Sink & Bathroom Basin Monobloc Mixer Tap Flexi Pipes Tails

Top rien à signaler

They seem well made, no problems fitting them and no leaks. New sink was fitted and needed either longer hoses or adjust pipework to still use 300mm hoses. This length hose seems to be hard to get hold of, even in the big tool stores. Nice to find some this length. Thanks

Ideal for what brought for brand new Vado tap that cost £125 came with some cheap plastic tap tails that leaked when fitted removed tap and refitted with these no leaks now and like they are colour coded for ease of identification. Feel much better quality than the ones removed from old tap aswell.

Bought these to replace the ones that came with a (fairly decent) Cooke & Lewis tap that kinked horribly with even the slightest bend. These are considerably more flexible and worked a treat. No integrated filters at the 1/2" end, but the colour coding of the outer flex is very useful. Produced a pretty nasty rubbery smell and taste until they'd been run through, so watch out for that, but that seems to have settled down after about a day of regular use.

Deep, unalloyed joy. After fitting isolating valves prior to installing a new sink from a place that stores baths I struggled with the tap connectors provided, which are designed to go straight on to the valves. There are other tap connectors available but the 300mm was perhaps going to be a bit tight as the sink is offset in the vanity unit, so 500mm it was. I fitted these up to the monobloc fairly tight using finger pressure only then onto the isolating valves, again finger tight only. I thought I'd give it a try to see the extent of the tightening I'd need to do with the spanner, but there is no sign of any leak at all. The washers in the female end are noticeably better than the provided wee fiddly things with a filter that got chewed up easily. Wholeheartedly recommended.