3D Solutech Skin 3D Printer PLA Filament 1.75MM Filament 2.2 LBS (1.0KG) - PLASKIN

No problems with this filament but it's more pink than "skin" color.

3D Solutech Skin 3D Printer PLA Filament is excellent. I've used other 3D Solutech filaments and have been extremely satisfied. They adhere well, print consistent, diameter is consistent, color matching from previous LOTs appear to be consistent. This filament is a couple of bucks more than lesser brands, but the price difference is worth it to me for a highly better product that 3D Solutech provides.

Does not look like my skin and I don't think I can get away with saying what body part it does look like.I bought this because it was cheap.II use it for test prints and supports with soluble at the interface.Prints clean. Almost as good as my favorite (3D solutech clear).I'll keep buying it as long as the price is under $15/Kg.

I did a lot of research on Filaments as there are so many options out there. 3D Solutech kept catching my eye and so far they have not disappointed. I have purchased 7 different colors now and have been very pleased with them all thus far. When I am looking for a color I search Amazon and it seems like 3D Soutech always has the best shades of that color.The prints have all come out great. I keep them in the box to help protect them and I really like that the box they come in has an opening in them so you can see the color. They all seem to be wound tight on the spool and turn easily. The 3D Solutech Skin exceeded my expectations. I will certainly be buying more colors in the future.

Wonderful product

Prints fine like most 3DSolutech filament I've used, but color was misrepresented. There's a lot of orange and pink in this color, whereas ad made it seem mostly tan.

they're both great filaments, just this one has more color to it, and esun is a lighter color (also depends on the temperature and layer height). both are incredibly lifelike.esun also is pla pro, which is a lot stronger than solutech. but if you don't care for strength, solutech looks fantastic.It seems to look best at 0.05 layer height or below. the esun one can be a little higher. 15mm/s outer wall speed for 0.05 layer heights. 25mm/s speed for 0.1 layer heights.210 degrees works best for me. anything below that, and it seems to harden in a strange way that makes it easy to knock over the bed. anything above that and I get stringing.

My printer loves soultech filament, prints without issues and seems to be really good quality. First thing I printed was a big ol Richard second thing I printed was a watch holder.10/10, will buy again!

This Skin colour PLA was expertly winded around the spool (tightly without apparent crossing over). The bag was tightly sealed. The full spool weighed 1.224kg. The colour was rich and yet, on the first few attempts, I had terrible performance issues and I got worried. There were two key setting to consider with this specific product. I had to change my retraction settings from 1.3 mm at 30 mm/s to 0.7 mm at 20 mm/s because I had terrible clogging. I also had to either print without any infill (0%) or to print with lots of infill (30+%) depending on application in order to eliminate the excessive cracking. Once properly adjusted, this product gave fantastic results as per the pictures. This product performed well with various geometries and thus I found it to be very versatile. I attached a photo with my final print settings.At $23.80/kg, it is well priced. I bought a second spool. I hope this helps.