Ultrasonic Gun Cleaner Solution for Gun Parts Cleaning, Concentrate (Gallon((128 Ounces))

This is far more expensive than I was expecting, but I dumped a whole gallon on the floor and had to replace it for the owner. It cleans well, rinces easliy, and can be used many many times if you don't dump it on the flooor.

It is what it says it is it works good with my Electro Sonic Parts cleaning gun so yes it works

Cleans everything except carbon deposits

Works very well.

Cleans great! BAGS come out nice. do the bolt separately, and don't bother putting the pivot pin and cutter pin in. 140° for about 6 min. is plenty. If real dirty do another dew.minutes. clean it good after with gun oil and then wipe oil off . leave just a film. perfect.

It works as well as practically any other cleaner, but costs way more. Might be more effective in some situations but in my experience (suppressor, trigger assembly, magazines, grip module, barrel and small parts) dish soap or common household cleaners are more than adequate.

I can eat off my gun parts

So I was very skeptical about how an ultrasonic cleaner would remove heavy carbon from my silencers, pistols, and other firearm components. I set the temperature to 55 degrees Celsius, set the timer for 10 minutes and put the cover on the machine. When the timer went off, I thoroughly rinsed all of the parts in hot water, dried them and inspected them... much to my surprise, all of the carbon was gone! I oiled up my parts, reassembled my equipment and then.... yep - you guessed it - used the same solution and cleaned (3) more pistols. They came out clean! Please be aware that if you have Cerakote'd parts, the finish may come off. No worries though, I didn't have to spend hours cleaning with solvent and CLP - scrubbing with patches and other GI cleaning tools! This cleaner WORKS!

Use in 6l ultrasonic system to clean full uppers and various bolt carriers. Works very well at 20 to 1.

Is as expected great

no super good for cleaning dosnt work much