This listing is for 2 boxes. Theses boxes are made to fit 4x10" speakers. Check out our other auctions for different sizes. Theses boxes are approx. 12" wide, 8" tall, and 6" deep at the bottom of the box. Speaker clearance depth is 3 1/2" on inside top to 5" on bottom. 16 AWG wire soldered to a quick connect/disconnect terminal is also included. All boxes will be the color of trunk liner charcoal with black sides as pictured unless you message us requesting a different color. If another color is desired, we are the manufacturer and can do this for you. Simply put in your payment notes to seller, or message us before or soon after you place your order with this following information: 1: The desired color of the box. 2: The desired color of the recessed sides of your box. These 4x10" speaker boxes are angled enclosures made with heavy duty 1/2" wood. The edges of each piece are glued with waterproof premium grade wood glue, fastened together with heavy duty staples, then we run a line of the same waterproof wood glue down all the inside seams. The glue we use is stronger than the wood making for a solid heavy duty box. We also installed a sound preserving quick connect/disconnect terminal on each box. We use the small size terminals as not to drill a large hole in the box. After the box is built we cover the outside of it in contact cement. This process seals up any exposed cracks in the seams on the exterior side. We then use the same contact cement to apply the carpet. We don't use any cheap products building these boxes. These boxes each come with 1 foot of 16Ga premium grade wire with positive markings which are soldered to the quick connect/disconnect terminal. We then pre stripped the speaker end of the wire so you can access the copper with ease. Best of all, these boxes are built by us right here in the USA.
Trustpilot
3 weeks ago
3 weeks ago
