Installation Methods of the Machine Stand and Push & Pull Meter: A .Installation Method of the Machine Stand: The machine stand can be installed on the table, which makes it more stable. Under installation, please ensure the work table surface to be level, in order to obtain accurate numerical value from tests. The installation refers to the (following figure) B. Installation Method of the Push & Pull Meter: 1 .Use M4 spanner to release the four M 4×15 socket cap screws on the dynamometer mounting plate, and remove the dynamometer mounting plate. 2. When installing HF Series (Digital Push & Pull Meter) Push & Pull Meter, use M4 inner hexagon spanner to screw the four M4×10 socket cap screws in the accessory bag into the four M4 tap holes on the dynamometer mounting plate through the 90x40 holes, installing the dynamometer onto the mounting plate; or use the Phillips screwdriver to screw the four M3×10 cross-slot pan head screws in the accessory bag to mount the dynamometer onto the mounting plate through the inside of the dynamometer.The 145×30 holes are screwed into the four M3 cap holes on the dynamometer. 3. When installing the NK Series (Pointer Push & Pull Meters) Push & Pull Meter, use Phillips screwdriver to dismount the four M×10 bolts on its back cover, and screw the four×14 cross-slot screws in the accessory bag into the four M3 tap holes on the dynamometer back cover from the 145×30 mounting holes on the dynamometer mounting plate (dismount the tap holes of M3×10 screws) 4. After the Push & Pull meter is installed, use M4 inner hexagon spanner to re-install the dynamometer mounting plate onto the machine frame. 5. According to the characteristics of the sample tested, place the machine stand in a proper position on the worktable. Rotate the hand wheel on the side of the testing frame, the dynamometer will be able to move smoothly up and down, completing the testing operation.
Trustpilot
3 days ago
2 months ago
