Broan-NuTone SP3004 Reversible Stainless Steel Backsplash Range Hood Wall Shield for Kitchen, 24 by 30-Inch

Easy install. Works, and looks good.

I feel like this could have been cheaper. It's just a thin sheet of metal you apply to the back oven wall. It's easy to clean and looks industrial. Installation was super simple and it paired well with my Cosmo range hood. It arrived without damage and sits flat against the wall.

I have three - one behind the stove, one over the sink, one behind the garbage can to protect the wall. It is a clean, uncluttered look and barely noticeable against off-white walls.

I received this order awhile back and we got around to hanging it tonight. We pulled out the stove and had the liquid nails ready to go. The product comes with a thick white plastic covering the side that will face out. I peeled back each corner near the screw holes in order to avoid unnecessary fingerprints while installing it. (Hint: Do not do this. Peel it all off first.) So we dry hung it, marked the holes, and drilled pilot holes. Then we liquid glued the back, hung it, and I held it in place while my husband drilled it in.So, excited for the reveal, we removed the white plastic and immediately noticed a deep black scratch near the top. (Thus my hint of peel off the plastic first.) We quickly tried rubbing the scratch off but it was embedded. No idea what it is, but the white plastic had a black backing, so I think it may have been scratched in? Fortunately, the liquid glue wasn't on its A game, so we unscrewed it, pulled it off the wall, and flipped the piece. The scratch is covered by the stove now.Others have noted this thing isn't precisely 30 inches. True story. We have about a quarter inch of wall on each side, and our space is exactly 30 inches from one cupboard to the next. So...this may bother you, it may not. I haven't determined if this bothers me yet. I think it'll be one of those house things that you notice when you DIY but no one else really notices or is just nice enough not to mention.Overall, I'd say this is a decent backsplash for the price. Other places I looked has similar items in the same size for more than twice the price. And its certainly an easy piece to hang. Even with having to flip the piece over, it took us maybe 20 minutes.

Easy to install. Just slipped it behind the range hood and counter top with a little clue. Make sure you use a soft non scratch towel to wipe. It was well packaged to prevent bending.

I bought 2 as a cheap solution to a backsplash and sidewall guard for a new range. They work perfectly. Quality is excellent: nice, consistent brushed finish without any apparent flaws, no burs to cut you on the edges. It even came drilled, which I was not expecting. This may be a disadvantage if you're planning to glue it up, but I had planned to drill it for screws.I don't know what grade of stainless it is. A magnet sticks, so it's not a high grade like 304 or 316. I'm sure it's good enough for the application.Packaging is excellent. It comes boxed up almost like a piece of artwork. You don't have to worry too much about UPS banging up a corner.

After getting new appliances, the oven we chose didn’t have any kind of backsplash. Since we’ll eventually put in tile, we decided on this for an oven backsplash. It was actually thicker than I thought it would be after reading some reviews. I’d have to agree with other reviewers that screws should have been provided. I didn’t have any issues wit bent corners or scratches. It came packaged like a painting. I did go out and buy some drywall anchors and screws (#10 or 3/16”). After peeling only the corners of the protective film, I put it where I wanted and with the help of another person, marked the screw holes. I will have to say that doing this BEFORE the installation of the stove would have made this a whole lot easier. As it was I had to pull the oven out because the backsplash extended below the back of the oven. I did run into the issue of putting it as high as I could that made drilling and then screwing in the screws a little difficult (drill clearance). Initially I left the screws a little loose so I could have a little maneuvering room while installing the screws (a two person job, unless you’re putting on some kind of adhesive). Unless you are below eye level of the microwave you don’t even see the screws. After I tightened all the screws I removed the protective film. If you’re using only adhesive, I’d make sure you’re hold it as pulling off the film made the backsplash bow. If I didn’t use wall anchors I can see it pulling out of the wall. Overall it didn’t take that long to install. I like the finished look as it matches the other appliances.

Es un producto de excelente calidad lo recomiendo!

As many, this arrived with a corner slightly bent and damaged. And this damage was before even being shipped since the second outer package was free of any damage indications. In my case, the damage was outside the dimension i needed so it's not visible once installed but beware if you need the entire panel. Otherwise, its a stainless steel panel. no screws included. and it,s protected with blue film.

Package and product were damaged by the shipper. They immediately dealt with the issue. So pleased with this vendor.It is perfect for when the stove is right up against a wall.

No issues with this, make the backsplash look amazing and professional in my kitchen.

Exactly what I needed