Micro Motor Warehouse CLOSEOUT NanoQX Motor Set, 6x15mm coreless (fast) CL-0615-14

Motors arrived quickly. All 4 spun up and flew well for about 5 flights. Do note the wire coloring is revered of the stock motors. Flew great. Very responsive motors, they "punch out" where the other motors would struggle and wobble about.After about 5 flights the motor I had in the front left started acting funny, it had obviously little to no power. I removed the prop and could tell the motor shaft has twice the vertical play as when new. Never had a bad crash, just fast fpv indoor flying over carpet. I think the shaft broke loose from the bearings/magnets. Replaced with 1 stock motor for testing and it flew well.Ordered a second set of motors. They work well but tend to yaw left when I punch the throttle (even to 3/4).All testing done with new props and motors. I've tried submitting a complaint to helination and will now try to Micro Motor Warehouse directly as I have no response yet. seems like from 2 orders I got 6 or 7 good motors, I'll try swapping them around until it flies like stock (but faster)

Simple easy upgrade to stock motors. Took a hovering but hard to maintain height Induxtrix and turned it into an FPV ship that if I punch it, it flattens the antennae to the ceiling. Shoot, I was giving it full throttle just to raise a foot or two. Not anymore.

The difference between the stock motors on the Inductrix and these is huge. There's a LOT more kick to these, making recovering from a drop much easier. I'd love to give these a 5 star rating but one motor started going bad by the 3rd flight and was toast by the 6th or 7th! I'm going to order another set and see if it was a fluke

Great motors. Now if you could make them brushless you would really have a special item.

Besides the ziploc looks good.c

work great in my inductrix with the added weight of the micro cam. I recommend

Good for building my small whoop.

Didn't fit my qx 3d I read wrong but building custom micro these will be perfect for so all is good.