1 (25mm) ID 10 Ft High Pressure Braided PVC Tubing Clear Hose Braid Reinforced

Just as described, I'm using it as a supply line to a waterfall and it works great.

We used this to pump and after 3 uses it flattened out and would not let fluid through it. Had to dispose of it poor product, weak, non-rigid, not worth the $

I was using this on a macerator. It kinked really badly. Made it almost impossible to pass liquid.

I was hesitant about this product since many of the reviews complained that it came flattened and that made it difficult to use. Maybe that issue was fixed by the manufacturer since I didn't have the problem. Yes, it came rolled tightly and flat to conserve space and I had the initial concern of it expanding back into a round tube. However, I simply unrolled it and left it for a day at room temperature and squeezed it by hand back into a round shape. It came back to a completely round 10 foot tube which was nicely reinforced for high pressure but stayed in shape for low (or no) pressure. I will definitely buy this again.

I bought this hose for an injection pump unit. It's not as rigid and thick as I would have liked it to be, but it does the job well. I would buy this again.

This hose collapses upon itself... never seen a braided hose like this that kinked under it's own weight.

I used a couple feet of this as a flexible coupling, between a jet-pump, and it's output connection .. basically a "steel" to "PVC" vibration isolator. Wherever you have a vibration source, such as a pump, and a steel to plastic joining, you Will have problems. The plastic (PVC) will eventually "waller" out resulting in a leak, which will only get worse. This 1" stuff is used in a normal 65psi max domestic water system. I have used this solution in another pump here which pumps 17gpm at 155psi for several hours at a run, using a different 1-1/4" appropriately rated flexible plastic tubing. These are both off-grid rural riparian systems, so check your codes where you live if this is allowed. Both systems do use NSF qualified tubing. The reviews here complaining of collapsing with zero pressure or vacuum, are simply using the wrong product. Note that I also use stainless hose barbs exclusively in these installations, with constant tension clamps. Hope this is helpful. Cheers!

Purchased for bilge pumps. Threw away good money. Kinked right out of package. Way too soft. Absolute junk if you're going to need it to curve.