Feyachi 2MOA Red Dot Sight - V30 1x20mm Compact Red dot Optics with Motion Awake Low Profile and Absolute Co-Witness Mount, Flip Up Lens Covers and Anti Reflection Device

I am happy with this sight. As a whole the weight especially with the skeletonized riser helps a lot.My setup has a gas piston and that inherently adds weight and also forward so far needed to be trimmed elsewhere so to speak.To the sight, I bought this as an aid for my home defense rifle for better lining up the sights. The sights are an absolute cowitness, some videos online might show lower third but, I have absolute cowitness with my Magpul mbus rear and a Midwest Industries fixed front sight on the rail.The on/off button has great tactile and click when pressed, the brightness buttons are the same way.The covers for the sight adjustment has an o-ring and helps keep the mechanism clean. The covers also has a raised portion to be used for dot adjustment in case you don’t have a flat head screwdriver.Positive and clicks when adjusting makes corrections reliable.I do not have any night vision what so ever; so I can’t speak on the night vision claim.The auto on/off I haven’t engaged. From what I’ve read sometimes gets turned in by walking by, and with my heavy steps and the occasional 2 or 3 magnitude earthquake (yay California) I rather save battery life.It did arrive with a hard case box and the honeycomb flash suppression was on, one of the combs was bent and it’s more noticeable from the front, but not through the sight. It’s honestly not an issue, I don’t see it so even better.Great red dot for the price, just for its intended purpose. With the features I use, the price is appropriate, the night vision and auto on/off is just extra gravy.

This seems to be great quality. Very easy to setup and zero in with the rifle.

-First impressionsIt has a very nice build quality. knurled elevation/windage adjustment covers, with flat head adjustment tool backs, are nice to have and the battery "clicks" in to place before even putting the cover on. Front/Rear lens covers snap snugly in to place and the anti-reflective disc fits great/works great. Fits my pic rail good and tightens down well (I recommend some removable grade Loctite on the threads). Overall I like it even though its just a little smaller than I'm used to. Mounting it closer to my face should help that though so no big deal.-Power onThe dot is nice and crisp with a good range of brightness settings for just about any situation. Elevation/windage adjustments work and the detents have a good positive click as they are adjusted. At first, mine wouldn't Auto On/Off which was very frustrating as that was a huge selling point for me. I read the instructions multiple times, watched video's, checked the manufacturers website, read review's and questions... You name it and I did it trying to figure out if this was a dud or if it was a setting sequence issue. I found nothing. So I decided to try a ton of tapping and holding different button combinations when I finally figured it out. Much simpler than I thought it would be. So here it is.**How to ENABLE Auto On/Off or Motion Sensor Mode**1st- Stick a good battery in it and make sure it turns on. See the red dot? Ok good, leave it on.2nd- PRESS AND HOLD the power button. The dot will go out like you just turned it off but keep holding the power button until the dot comes back on (mine to about 7 seconds but I'd hold it to 30 seconds just in case yours is different). Once the dot comes back on RELEASE the power button. Now you're Auto On/Off mode has been enabled.3rd- Test it and make sure it does what it's supposed to.4th- Now that you know how this works, buy more for the rest of your boom sticks.-ZeroingMaking the adjustments were easy/precise. After a simple drop test (mounted to CLEAR/UNLOADED rifle, in a soft case, 5' drop, 5 times), the red dot held zero just fine.4.5/5 Stars overall for me since the instructions were of no help getting the Auto On/Off or Motion Sensor to work. Hope this helps others as I see many people don't know how/ are having problems getting that feature to work.Nice Job Feyachi! Write better instructions.

Very great product works right out the box with included batteries got it zeroed to 250yrds on my del-ton echo and it still holds and I have noticed no shift in the dot.

[UPDATE] Feyachi contacted me about my issue and sent the correct screws. They were very courteous and apologized several times about the packing mix up. I understand things happen. They made it right quickly and without any hassle at all. I will buy more of their products. I appreciate the prompt support.----------------------------------------------------The sight itself seems very nice. Perfect for my needs. The included tall mount bracket and the great reviews are what sold me on it.When I got it, I tried to mount it to the tall bracket to find out the screws included are too long and bottom out in the holes. They will strip if you try to force it tight. I guess I will have to return it.I even went to 4 places looking for shorter screws but could not find any this small in diameter.If you don't need the taller bracket, I would recommend it but if you need the tall one, don't buy.

does its job just fine but the plastic that makes up the lens covers and the dial covers breaks very easily. holds a zero great and the shake to wake feature helps save the battery.