Possbay Universal Car Shark Fin Antenna AM/FM Radio Signal Roof Aerial for Auto SUV Truck Offroad with Adhesive Base White

Works well. Installation was a bit difficult. The sticky pad needs to be thicker. Looks good, works good and was inexpensive.

Wanted to get rid of that huge antenna mast but didn't want a solution that involved tools. This fit over my old base fine, but I did use two strips of electrical tape to hold the wire down before the coil inside. The coil is a little unnecessary as it just takes up more space, but if your savvy just do what other reviewers did and modify the wire to your liking, or even just a little tape like I did. I got the adhesion onto the base of the product fine, but the adhesive strip does come bent up like other reviewers have mentioned. I also got it screwed in and placed on the roof with no problem. The screw is taller than the treading on my car but other reviewers have mentioned that as well, so get a smaller screw if that bothers you. I do see a slight gap between the plastic and the roof where some of the adhesive strip can be seen in some places, but this is only upon very close inspection and doesn't bother me at all. Standing anywhere around my car this thing looks factory installed and the black gloss just shines amazingly. I won't lie, upon turning my radio on in the driveway I was only able to get one FM channel. It could be due to the longer screw causing a weak connection to the products antenna, or the fact that this isn't as effective as a tall mast. I do live in the country so maybe signal improves when closer to the signals source. Satellite radio came in fine. This isn't a problem for me as I mostly use my cars radio as an AUX for a tablet mounted setup I have in my car. If your main source is FM radio you might want one with dual antenna if you live out in the country. If you mostly use AUX or live in a city than this will be no problem for you. Final thoughts, I'm very satisfied with the product. It definitely makes my Dart stand out and accents the other gloss parts I've installed. Setup was fast and easy, and the final result was definitely worth the money and tape for me.

Gave the look I wanted but the radio reception tanked. What was 100% clear with the original antenna became fuzzy most of my work drive. And about 10min of my 40min dive had no FM radio channels except 1 of the 15+ I normally get. Just yanked it off and tossed it in the trash where it belongs.

Shark fin broke off on 2015 Hyundai Sonata after freezing temps and snow. Car is out of warranty and the dealership doesn’t replace covers, they replace the entire assembly. My car has 177,000 miles on it so I couldn’t justify spending money on the entire assembly. I was worried about this shark fin replacement fitting and my radio and nav system working but took my chances. This shark fin cover fits and my radio/nav system works well. I didn’t hook any wires up or do anything special because I truly just don’t care and just wanted the electrical board covered. So, I gorilla glued the bottom of the shark fin and covered the electrical board with the fin. I let that sit for a couple days and didn’t drive my car then sealed it with black silicone all around. I let this sit for 15 hours overnight. I woke up and there was frost all over my car and the fin so I thought it would break off. But had to go to work so I took my chances! All was well and I drive on the highway and it didn’t fly off. It is extremely secure, fits and covers the board, and the radio/nav system still works!! If you don’t have gorilla glue or black silicone, JB weld would work fine too.

I used this to repair a broken antenna on my 2013 Ford Escape. The existing antenna was brittle from years in the sun, and shattered. I was able to sloppily glue that together, and then install this antenna over top. It was a tight fit for my vehicle, but a great alternative to spending hours pulling down the headliner to install the oem antenna base. I would recommend some rtv adhesive sealant both in the screw threads and on the base of the antenna when installing. I was not confident that the included 3M tape would hold the antenna long term. For a vehicle with 200k miles, this product was worth the time and money saved. It’s not perfect, but it will get me by.

Muy buena pieza para cambiar la apariencia del auto, el único inconveniente que no traía el tornillo para adaptar la antena

Very nice product, was very happy but after couple days the double sided tape started lifting (I did clean the surface with alcohol before installing). Now going to have to go buy some mounting tape at local hardware store since Amazon can’t just ship me the tape.

My new garage door meant I had to remove the existing aerial to avoid hitting the door on entering. This shark fin replacement solved the problem, the white finish matched the paint work of my Kia Venga and therefore gave a factory finish look. Reception of radio channels was also very much improved and places where I used to get dead spots are now picking up a reception. In my case I really can't fault the product especially at the price

Moeilijk op de auto te plakken

تم رفع شكوى باسترجاع المنتج وتواصلت معهم لاجدوى من ذلك لا اعيد التجربة ابدا . الرجاء التاكد من منتجاتهم المعروضة وشكرا