the picture is too large and covers the description. What's the input voltage?

Hello,Drive Voltage(V) is 30-34V, input voltage is 110-240V.

Is it dimmable? If so, which driver do you recommend?

Yes it is Dimmable. I just got one in today and inmediatelly put powered it with my programable power supply as follows. Plus and minus rails with 0 Volts to start with. Once there I began to increase the Voltage 1 volt higher on each step while looking at power comsumption. At 26 Volts nothing, at 27 volts light came on, dim and low power compsumption, at 27 it was brigh already, at 28 volts was way too bright for me and the power compsuption was 28 watts. It didnt even get warm so I did not even come close to half its power rating. I did this just by increasing the voltage. So for those who said this is NOT dimmable other than with Pulse width modulation, you could not be more wrong. In fact each bare LED I have tested, has been dimmable. Sometimes within one two two volts but dimmable never the less. Please pay attention to the word "BARE". Some of my lightbulbs are not dimmable because the electronics used to drive the LEDs do not allow it. The Bare LEDs I have come accross, all have been dimmable without PWM.. You just need to use precise voltage adjustments. I am talking millivolts of difference you can dimm the LEDs very nicely from 0 to full light and usually around 80% bellow its their rating, LEDs produce about 95% of their maximum output. Want to save energy? drive them to 90% of their voltage Rating and add a on and off frequency of 60 Hertz. The LEDs will be blinking but our eye persistance will not see it. We only see an LED that is Full ON. Just like the old CRT TV's. They were blinking at evry slower rate and we never saw it.

Making a high power flashlight

I built a flounder light. Attached this light to angle aluminum, created dam surrounding light and incased it in bar top epoxy so it is Submersible in water. I even put several heat sinks behind it. This light takes ALOT of heat exchange to keep functioning. Even with the heat sinks out of water as light I think it would burn itself out, I only run it For less than a couple of minutes if that out of total submersion.

Brand	L LOHAS LED
Light Type	LED
Special Feature	Durable, Easy to Install, High Performance, Powerchip, Quiet
Wattage	100.00
Bulb Shape Size	B17
Bulb Base	E26
Incandescent Equivalent Wattage	100 Watts
Specific Uses For Product	Fishing
Light Color	Cool White
Voltage	30 Volts
Unit Count	1.0 Count
Color Temperature	6000 Kelvin
Number of Items	1
Brightness	8000.00
Shape	Square
Material	Aluminum
Indoor/Outdoor Usage	Indoor
Power Source	AC
Color Rendering Index	10
Power Consumption	100 Watts
Item Package Quantity	1
Light Source Type	led
Item Weight	0.01 Ounces
Light Source Wattage	100 Watts
Product Dimensions	1.57"W x 2.17"H
Accepted voltage frequency	100 to 240 Volts and 50 Hertz to 60 Hertz
Control Method	App
Average Life	30000 Hours
White Brightness	8500 Lumens
Efficiency	80-90 lm/W
Global Trade Identification Number	06002322087404
Manufacturer	L LOHAS LED
Part Number	LH-XP-100W-6000k
Item Weight	0.01 ounces
Item model number	LH-XP-100W-6000k
Is Discontinued By Manufacturer	No
Size	1 Count (Pack of 1)
Color	Cool White
Special Features	Durable, Easy to Install, High Performance, Powerchip, Quiet
Included Components	Light
Batteries Included?	No
Batteries Required?	No
Average Battery Life	30000 Hours

LOHAS® 100W LED Chip Cool White Bulb High Power Energy Saving Lamp Chip

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions