FiberWeld Pipe Repair Cast 2x48 Inch – High Strength Adhesive Fiberglass Wrap – White

At first it appeared that it didn't stop the leak. Twenty-four hours later...no water leaking from the pipe. It's a bit messy, so you may want to have an extra pair of gloves available, but it's worth the mess.

I had a small hole in the connector pipe between the inside pipe and the pipe to the hose spigot outside. I discovered it after receiving a 200 water bill. I bought this along with a couple of other things to repair the hole, since I didn't know how they would work. I decided to start with this item and guess what? I didn't need the other things I ordered! This stuff totally fixed my problem, and it wasn't complicated at all. The only mistake I made was I thought the black bandage included was the strip that you submerge to activate. It's not, you want the one in the silver bag. It's not labeled, it just has the cautions on it. Basically, I kneaded the putty and placed it over the hole. Then I activated the fiber tape, be careful, it is messy! I wrapped it around the epoxy putty and then covered it with the black bandage and left it to cure. The only problem I ran into is that you are supposed to leave the bandage on for a few minutes and then remove it. I must have left it to long because it fused to the fiber tape and I couldn't remove it. It cures in about an hour, but I waited 24 before turning on the water. I watered my yard and garden the next day and it held just fine. I saved my cheap landlord a healthy chunk of change on a plumber in about 10 minutes. If you have a small repair like I had, this stuff works wonders. Application was easy but messy due to the fiber tape, but they include gloves. The price point wasn't painful either. Definitely cheaper than a plumber!

I used this to repair a small leak in a 2" pipe, and it worked perfectly. The wrap activated easily with water and was simple to apply, even for someone without plumbing experience. It set quickly and cured solid within 24 hours, just like the packaging said. I was impressed by how strong and secure the bond felt once it hardened. It’s a great emergency fix and saved me from a costly repair. Highly recommend for anyone needing a fast, reliable pipe solution!

I purchased this FiberWeld pipe repair cast to fix a small leak and stabilize a damaged section of pipe. I needed something quick and easy that didn’t require special tools. The instructions were clear, and the application process was straightforward. Once activated and wrapped, the material hardened as expected and formed a strong, secure seal. It adhered well and provided immediate reinforcement to the pipe, which helped stop the leak and prevent further damage. One thing to keep in mind is that this works best as a temporary or emergency repair. It’s very effective for stabilizing the issue, but it’s not a replacement for a full pipe repair or professional fix. Overall, this is a reliable solution to keep on hand for quick fixes or emergencies. It’s easy to use, works as intended, and provides peace of mind until a permanent repair can be made.

good product worked on my turbo pipe

I tried a few other pipe repair products that were silicone tape; they still left a lot of leakage. This one actually works, though. Water was spraying everywhere, but when I used this repair kit, the leak was reduced to a trickle. It's a bit tedious to apply because there are two layers and they need to be prepared and cured, but it's worth the effort.

I used this for the first time, after using the powerwrap brand for 30 years, and must say it didnt perform like the original. It took much longer to adhere, harden, and dry. The original gets hot, sets up quickly, and sheds water, dries in 20 minutes. This time, it took 30 minutes to set. It wanted to keep unraveling. Then it took an hour to harden. And no heat to signal that it was working. Then it leaked ever so slightly, requiring a 2nd application. The powerwrap, all I ever had to do, instead of dunking it in water, was to wrap a layer, spray it with a spray bottle, then wrap it completely, and spray with water. It gets hot, and solidofies in 10 minutes to a very nice seal. Idk if i got a bad apple, but it just didnt work like the original.

Very easy to use , it's a little messy , but it has to be to seal .. I had a pressurized water line under my sink start leaking with a pen hole leak.. it took about 5 mins to install and an hour to cure. But this stuff cured hard as a rock ! Buys me the time I need to get a plumber out and be without water on Christmas.

Excelente.

bien reçu

Expired more than 1 years ago, can’t use .

expried one year’s ago , can’t use

Kit is easy to use and did an excellent job, Highly recommended.