250 Sets, NCR Paper, 5887, Collated 2 Part (White, Canary), Letter Size Carbonless Paper Appleton

The pages stuck together and my printer would pull the yellow about an inch before the white would follow. This is probably more to do with my printer than their product. The white page is rough on the back side and my printer doesn't work well with rough paper, though it usually jams rather than pull double sheets.Once I got the papers separated, they went through my printer great. This was tedious and took about 30 minutes, and of course I had to put them back together after the printing was done. I didn’t try to activate the glue, there was no instructions on how to do this. The forms were needed the next day, so there was no time to experiment with the paper.The printing worked great after separation of the two colors. Likewise with the transfer from the original sheet to the second sheet. It worked for the purpose intended. The inconvenience of having to separate and then put the forms together, and the cost of time to do so, is something I can live with. I could have a print shop do these, passing the inconvenience of printing to them, but the cost of $25 for 50, when I need over a thousand, well this works better for me.I was worried after reading other reviews on how the transfer from the white sheet to the yellow sheet didn’t work. The first test sheet printed on the wrong side of the white sheet. I tried writing on the white sheet over the yellow, nothing. I thought maybe if I flip the white sheet over, again nothing. I flipped the yellow over and tried again. Nothing. I started looking closer at the white sheet, and that’s when I realized it was rough on one side. I printed another set with the correct side being printed on, and the transfer worked fine.Bottom line, you will need to pay attention to how your printer pulls the paper and then make sure you print on the right side of the white sheet, otherwise, I think it inactivates the ability to transfer. None of the other sheets had any problem with transferring to the yellow.This will work for me, both with cost and my printer’s co-operation with the roughness of the paper. I will be purchasing more and experimenting with the adhesive the next time around.Also, received the next day as expected. This came in a bigger box rather then a soft plastic envelope. There was no damage to the paper.

After reading the reviews we decided to try this product and are so happy we did. We were taking our invoices to the office store for printing in batches of 100. This made it difficult to judge how long they would last, tough to make changes to our master as we added or deleted designs (we sell fine art note cards, so designs come and go frequently and seasonal designs also come and go), and it was expensive. This product, along with the fan apart glue, is a fantastic alternative. (Note: the jar of glue, which is thin as water, will last you a very long time. I have gone through one package of 250 2-part sets and you can't even tell I have used any of the glue.) Once I overcame the challenge of loading the paper in the printer properly (something you only mess up once!), subsequent printings have been very quick and easy. This process allows us to change our invoice design at will and print small batches as needed. I would recommend not printing less than 12-15 sets at a time since it's much easier to do the gluing process on larger numbers of sets at one time. Hint: I use the quick-release hardware clamps from Home Depot to hold the stack of sets together while the glue dries, using binder clips on the top outside edges as well. The large aperture in the hard-plastic hardware clamps allows for easy application of the glue to the top edge of the stack of paper. I also use the cardboard backing from a legal pad on the top and bottom of my stack to protect the paper sets and provide a sturdy surface for the clamps. It takes about an hour for the glue to dry, but we usually just leave them overnight before unclamping our stack. Then, just fan the stack and you're ready to go! Works like magic. Unless you have loaded the paper incorrectly when you printed, which I did the first time I tried this - ugh! Had to toss them and start over, but I never made that mistake again. Now I double-check that my stack of sets is loaded properly by gently scoring a corner with my fingernail and checking to see that it went through to the yellow copy. Works like a charm! I highly recommend this product.

Worked well in my inkjet printer, provided a quality product for resale.

We needed duplicate copies of Rabies Vaccinations as we host vaccination clinics at our local Humane Society. We usually had to contract out and learned about NCR paper and can now do inhouse. Paper worked great!!

We used this product for our silent auction and as people were writing bids we realized only about half the product was working right and coming off on the yellow copy! Huge disaster.

I was hoping to find a two part form with a perforated top holding the two together. This is the closest product I could find to create my custom forms. Instead, I line them up and staple. I don't need to create too many at once so it's ok.The transfer is legible. However, one form with two parts would save time and printer ink.

It works as designed, not having any issues with it.