Outdoor Indoor Waterproof 12VDC 24VDC 600lbs Holding Force Magnetic Door Lock with Z and L Brackets for Access Control Door and Gate Opener, Fail Safe Electromagnetic Door Lock Gate Lock

Very good no issues here pretty simple set up .went quick works well

I purchased the Supreform E-lock/Maglock for my Elite Miracle One (EM1) gate opener. Initially, I had trouble of figuring out how to wire it, none of the configuration diagrams provided would work for my EM1. I measured the output of my EM1 Maglock (connector pin 2 & 3) and got only 10-12 VDC at the beginning of each open. I contacted the Supreform manufacture and asked them if I can use the 12 V Relay and wire to my EM1 using 24V Relay’s diagram. They replied with a “YES”. It works great after all of the troubles because not enough information. Great product, very low price, comes with two relays (12V & 24V), all needed mounting brackets, very lightweight, low power consumption, does not need extra power supply, connect directly to the 24V battery and they provide great support.

Solid product, with some small improvements.

Instructions a little baffling but if you tinker enough it works well. Angles of the magnet and strike plate but be spot on

Good magnet, great price!

Due to occasional strong winds, gate was pushed opened sometimes. Now, with the maglock in place, it seems to Hodor - hold the door. For those who ask why it's outdoor/rain friendly. The internal electronics is covered in black resin. And as for the small hole where the connection cables come out - just use some sillicobe or an ear plug to fill it (although, unnecessary)

Lasted one year. Light is red and is supposed to mean magnet lock is working but it is not.

Easy to install and works well