Seneca AV SD11 Desktop Mount for 13-inch to 27-inch Displays

Easy assembly, looks great has made my work station much more usable.

Ok so bought this to help set up a driving pit for racing sims. The product is good over all for a standard use case np excellent. The problem I have though is that 3 exactly the same monitors on it does no line up seamlessly for me. The 2 side monitors both come a half to 3/4 inch below. The center one for me. This is with hours of trying to tweak it.Kinda disappointing as the picture clearly shows the monitors line up as such. Other than that little issue yes recommended for standard work station use.

I finally finished building the desk for my gaming/audio workstation earlier this year. Before this point, I was using a large plastic folding table that wobbled a bit with the weight of the equipment sitting on top. I bought this to get my 3-way 27in monitors (144hz 1440p) up closer to eye level, and free up the space underneath for other equipment.I ended up buying an open box item, which saved me probably 20 bucks. I will assume it came with all the parts, as I was able to get it set up. However, because mine didn't come with instructions, it was a bit more challenging than I expected. Yours may come with instructions though, but I can't say for sure.Overall it's not a terrible mount and functions fairly well once you get it adjusted properly. The adjustment process though, is tedious as the tilt mechanism (foward/back) will move slightly if jarred too much. When you're hanging 3 monitors that are probably 15 lbs apiece, you will inevitably jar the assembly either way. My other main gripe with this is that even with everything perfectly tight, it does sag just a bit. the monitors on the right and left don't always like to line up flush with the center monitor. This didn't end up being a deal breaker for me though, as I needed to put one of the two sets of speakers on the table, and they happen to fit perfectly under the left/right displays. This offered some slight support to the monitors, and made them sit flush. Only other thing I can think of is that the raceway to hide your cables is NOT big enough for 3x AC Power cables, 3x DP cables, and the 3x USB3.0 hub cables. I ended up wrapping the cables around the arms to keep them out of the way.For the price I paid, I'm satisfied with this purchase. However, if I had to do it again, I'd have sprung for a slightly more expensive mount with gas shocks and more substantial mounting hardware. You get what you pay for though, and in this case, you get quite a bit for not a lot of coin.

WOW... I bought the triple monitor mount for my 28" & 24" monitor currently with plans for a 3rd in the future & this thing is almost crazy heavy duty! I was not expecting it to weigh as much as it does at all.My monitors are very securely in place now & even with only a center & left monitor there is no lean or sag at all & despite the different sizes they line up extremely well! I feel very confident in this mount!My only criticism would be the very small surface area of the clamp where it attaches to my desk. I had to reinforce my desk with some planks of wood where it clamps for fear that it would break my desk from the weight & twisting force of the monitors pulling to one side. Making it a little deeper & wider would give it a larger surface area, making this much less likely.Overall a great purchase at the price it got it for!($40)

This stand is pretty stout for the price. The hardware for the stand isself is appropriate for the job, and even a little over stout for the clamp which is awesome. I wound up using the through-desk mount because of the design of my desk, and it's very sturdy.The included tools are a nice touch, as well. They aren't top quality, but they're no sissy tools. They will get the job done comfortably.However, I have one gripe... Most monitors have about 1/4 inch past the surface for the screw to pass. Maybe 1/2 inch if your lucky. So riddle me this, Kanto Distribution Inc., why did you package 1.5" screws with 0.5" standoffs? If I didn't have to go to the hardware store for proper length screws, this would be a 5 star review.

So bought solid wood top desk that could not use the clamp to attach due to side wood trim on desktop. So drilled 7/16" hole in new wood desk to mount this using alternate grommet methed. Then once the upright attached, proceeded to slide cross section that holds the monitors over the upright tube to find it cracked and misshapen. I am very disappointed. I have a brand new desk with a whole in it and three new 27" monitors and no way to mount. Disappointing....UPDATE: Called Amazon cust service and was sent a replacement that arrived in less than 72 hrs. Took pictures of box before opening as it shows how little it mattered to the manufacturer. One of the plastic arm caps was busted into about 8 pieces. If that wasn't enough, the cross section is too small for the upright tube. It appears the manufacturer did not account for the coating thickness in design. Returning for refund, burned twice on this product. This seller/item should be banned ? from Amazon until properly designed and properly packaged for shipping. I have been a very happy Prime member for years and this experience leaves me doubting that I can depend on Amazon for big purchases. This item was purchased along with many other at one time $$$ a desk, 3 monitors, docking station, wireless mouse, keyboard, office chair, ect. I am unable to verify the working condition of the other electronics as the monitor setup is not in place and the return window if something is wrong is closing. I have already ordered another brand 3 monitor mount. If I get stuck with any other defective items from this big list of items purchased because time for return expires before I am unable to get a monitor mount through Amazon that is as advertised so that I can setupthe rest of the office. I will leave Amazon FOREVER!

I've purchased 3 of those the past 5 years, the latest one only a few years ago. Works perfect, the oldest one still looks brand new. Multiple mounting options, reasonable price. Great for with my Acer monitors

It was pretty easy to set up. Everything arrived and I wasn't missing any parts.It does take a little bit of trial and error to get it how you want it.It does require a fair amount of room (depth wise) for the desk, but honestly it is worth it. I love having the screens side by side and it makes everything much more sleek. I suppose as an added bonus I can have more free desk space as well.

Never used this unit cause the monitor I purchased didn't have the mounting system needed.