2 Pack 3D Beehive Honeycomb Silicone Candle Moulds with 50pcs Candle Wicks and HolderSpecificationMaterial- food grade silicone, non toxic and odorless, safe to useMeasurements- small beehive mould 1.97 (H) * 2.28"(OD), finished product size approx 1.69" tall, 1.3 oz (36 grams)ï¼› large cylinder honeycomb mould 4" (H) * 2.96"(OD), finished product size approx 3.15" tall and 2.28" diameterMicrowave oven, dishwasher safe, easy to cleanColor- PinkWeight- approx 95g and 280gSo many uses for this mould: idea for handmade candle making, jelly, ice cube, baking, sugar craft cake decorating or other diy crafts. Make a great Gift for your kids or friends in the their anniversary!How to make a candle with this mould1. Run the wick through the bottom of the mould using a large eye carpet needle. And use a wick sealant or white tac, which should keep any of the wax from seeping out2. Secure and center the wick to the pouring area (top of the mould)3. Use rubber bands that are snug but not tight, the rubber bands should only be snug enough to hold the mould together without deforming the interior of the mould.4. Place your wax into a double boiler to melt and add your color and fragrance as your preferences5. Pour melted wax slowly into the mould to reduce air bubbles, casting temperature of the wax should not exceed 170 degrees F6. Let cool and top off as wax shrinks7. Cut Mold down two opposite sides until candle can be removed freely. The mold should not be cut all the way to the bottom.8. Finished Candle measures approx 2 inches and 3.15 inches tall9. Clean the molds with soap and water between uses, otherwise dirt and old wax will build up and affect detail.
R**.
Good quality
Looks really sturdy and am really excited to make candles with it!
M**I
Wrong entering device
The set is impossible to use because of entering device. the holes are not big enough to slide the wick's base to it.Avoid this really cheap.
A**R
Moulds perfect - do not need cutting to extract candle
Works perfectly! I used a cocktail stick to pierce a small hole in the bottom of each mould, then pushed the wick through and filled with wax. I found they didn't leak and that I didn't need to cut down the sides - the moulds are flexible enough to just stretch slightly and push the candle out. Made over 20 candles with these so far and the moulds are still as good as new.
R**N
Nice starter moulds
Super pair of moulds.
Trustpilot
5 days ago
4 days ago
