EZDIY-FAB 12V to 5V RGB Converter, 3-Way Splitter, SATA Connector, 50 Color Modes, 100x 5V LEDs

Installation took less than 5 minutes, worked great with my newer 3pin fans on my older Asus 4pin rgb header. Just make sure you have the extra spare SATA power cable to power the unit. Worked flawlessly with RGB Fusion 2.0 as well.

Using this for an ASUS board to connect my rgb fans to it, it's been working fine for a year.

Worked as intended to plug in to 12V 4-pin RGB header on MB, and light up my arctic p14 aRGB fans with 3 pin connector. Lights are selected with button on device, but you can also plug it into "reset" button on your MB and control LEDs with that without having to open your case.

Using an older motherboard but didn't pay attention to the RGB header on the motherboard and the fans I got and this adapter came in clutch not having to replace the fans just for the RGB to work. One of the great things too is that the sata power connection is a cable which all the other adapters lacked making it easier to connect to the one spare power port I had left. The one big downside is the color going back to default whenever you reboot your PC. Other than that works perfectly.

This product is awesome! My MSI B550 Gaming Gen3 motherboard didn't have 3-pin RGB but had 4-pin RGB support instead, and this converter made it possible so I could use this specific RGB device. Plus, I can control the RGB toggles with the converter/controller instead of bothering to download external software.

So it took a little bit to get this thing working, but once I did I'm very happy with it actually. I have an MSI x470 Gaming Plus, which only has 12v 4pin RGB headers on it. I connected the power to a SATA cable, connected the other to my motherboard RGB header and then connected my aRGB devices (Phanteks Halos Luxe Digital) to the 3pin splitter. Voila, it works! However, here's where I think a lot of people may find this review useful. I wanted to use one of the preset lighting effects of the RGB converter and it kept just defaulting to my motherboard's lighting. I opened my glass panel, pressed the button and it switched to the desired effect. Then when I rebooted, it would be back to motherboard settings. I was NOT going to do this every time I booted up, so I opened MysticLight and tried playing around with the settings. MysticLight for my motherboard only had basic lighting settings so I couldn't do any lighting effects except solid color with a breathing, flashing, etc effect on it. The RGB hub does not do "breathing" effects well. When it breathes, it just kinda flickers and shuts off, then comes back on again. So I had a thought... if this adapter has preset lighting effects and I only want to use those, why do I need to connect it to my RGB header at all? I disconnected the 4pin rgb cable from the header (but obviously kept the SATA power connected) and the hub finally would remember the effect that I wanted. The reason I gave this 3 stars is because there's really no way to attach the hub to your computer. Many of the other hubs have a magnetic back or something, but this I had to zip tie to the bottom of my case (I have the product circled in my image). I also found that the 3 pin connectors on the splitter were really flimsy and bend/detach easily. After I connected the RGBs to the hub, I actually put electrical tape around the connector because the male and female connectors ripped apart from one another and bent one of the pins when I was trying to do some cable management. Other than that, it works as intended! TLDR: - When connected to motherboard, it defaults to motherboard lighting settings - Using MysticLight, there aren't any cool effects, and the "breathing" effect does not work properly - IF YOU WANT TO USE THE HUB'S BUILT IN PRESETS... DO NOT connect the 12v 4pin to your motherboard RGB header - I recommend electrical taping the connections together from the 3pin splitter to your RGB devices, as it is flimsy and doesn't stay together well. Hope this helps someone else looking for RGB/aRGB solutions for their PC!

This was a super easy install basically plug n play, and as soon as I tested the fans just by powering on the pc it automatically synced. I was using this in order to connect my asus rog strix lc360 rgb aio because I didn't have another 3 pin connector on my motherboard and this easily resolved my issue and my pc looks amazing! Low quality material for the hub however, it is a quick solution that is budget friendly and super easy that my grandma can do it! I will keep this review updated in order to continue to explain the longevity of this solution but until then I am giving this product a 5 star review because I am extremely happy with the result.

Great product , does the job. Splitter gives extra flexibility. The converter itself is surprisingly small which is great for cable management

It's working my motherboard smoothly value for money easy installation

Se sincroniza facil al aurasync, todo muy bien

Faz o que diz que faz

Bought parts for someone, who wanted RGB on his build. Not being a big fan of RGB myself, I did not know there were different standards for that... and of course I ended up with 3 pins 5V ARGB fans incompatible with a motherboard with 4 pins 12v RGB header. I was a bit skeptical about having to use and extra SATA power connector, but happy to say it did fix my problem. After connecting two sets of fans there is even an ARGB connector left thanks to the provided splitter. Control via remote works, I had to leave it hanging at the back through a PCI expansion hole for ease of access. Sync with the mobo I used (ASUS B660M) sort of work but colours are however not mapped one to one. This was mentioned by the vendor, so can't fault them for that. Overall a rather simple fix for relatively cheap.

Los colores son iguales a los que se pide, sin embargo no funciona si quieres personalizar con el 'aura creator' pero si con lo demas