OPHIR Airbrush Spray Booth, Double Fans Paint Spray Booth with 3 Led Lights, Mini Photo Booth with White Photography Paper, 10xColoring Clips, 30xSpeed Shape Vinyl Car for Hobby, Model, Craft Painting

Set this up today and very impressed. My biggest concern when ordering this was the adjustable controls because the some of pics on the order page looked like rocker switches. No worries - the pic above are the rotary knobs on the unit I received. Assembles very easily and appears to be quality components. NOISE - 60-61db directly in front of the machine at full power (this was the loudest area - sides and rear were 54db) 55db at half power. LED's are nice and bright - I found 3/4 setting was comfortable light while I was spraying. Has good evacuation around the spray opening. Tested with a smoking cigarette and it pulled with no issues from about 3-4 inches OUTSIDE the spray perimeter. Sprayed lacquer for about an hour and no issues with how well it kept the fume level low in and around the unit. To be fair - I unscrewed the vent on top of the machine and applied a bead of silicone around the perimeter and also put silicone beads around the tube joints at the window outlet vent and the rubber connector that attaches to the machine. Not sure if this is needed but I did it during initial assembly just to rule out any leakage. It breaks down easily and all the components fit inside. I store it under my hobby bench with the vent tube alongside. As a hobbyist, I probably spray 6-8 hours a week. I'll do an update in 6 mos regarding the longevity.

This is an awesome product. It is super easy to assemble and the LED lights are super bright. It has great air flow and is adjustable. Much better than my old paint booth. I have painted 3 cars so far and it did a wonderful job.

This is my second booth in 10 years from this same manufacturer, the first being a single fan version. Things about this one that are good is that the air vents upward instead of backwards, giving more room to push the booth back on your desk for instance. The opening of the booth is very wide, bigger than I thought it would be from the pictures. The lights work great and are on a dimmer, nice and bright if you want it without washing out what you're looking at. Assembly was easy. My only gripe is that it SEEMS like the fans, even being a double fan setup, don't pull particularly hard through the filter, even on the highest setting, and BOY is the high setting loud. So I recommend it, but make sure you have at least 3.5-4 square feet on your desk to position it.

Perfect for small projects like model car painting. Use it in my apartment, the snorkel vent fits perfectly in the window and you don't get any smell from paint fumes. Powerful exhaust fan speed with adjustment for whatever your venting needs are. LED lighting is great, it has adjustable levels for the right amount of light needed with 3 lights from the top and both sides.

I've had this booth for a couple of months now and have used it several times. I have used enamels as well as acrylics, air brushes and rattle cans. The double fans manage to pull out the fumes with no problem. I love being able vary the fan speeds. the fans are quite noisy at full speed. My hobby room is downstairs below our bedroom, but you can't hear the fans in the bedroom, so that's a win. The LEDs are bright and adjustable also. No problems seeing the model while I paint. It is a large unit and takes up quite a bit of real estate. I have it on an old printer stand which works great. I'd buy this booth again if I need one.

Edit: After my initial trial run where the booth performed poorly, I did a bit more research and found this little footnote in the product description saying "Note: Not intented for use with Hazardous Materials, Flammable or Explosive Paints or Materials." What does that mean? That means that this booth should NOT be used with solvent based paints like many people in the reviews appear to have been doing. Extremely disingenuous to place this safety disclaimer in such a tiny footnote. If you are using water-based acrylic paint you are good to go but for any lacquers/enamels, you are better off investing in a proper paint booth (eg. Pace or Robot Kai) that is meant to handle them. The adjustable fan and light are super nice perks. Especially if you got neighbors, the fan doesn't make a lot of noise till its about 75%. Unfortunately, as I came to realize, it seems like the booth just doesn't pull enough air to filter fumes if you run it at 75%. I need to test how it performs at 100% but it's about ~75dB compared to ~55dB at 50% then so it's quite a bit louder. The booth itself is a bit shallow and short and I find that it doesn't do a great job of catching the overspray. Will try playing with spray angle to see if that helps but on first trial I could see the overspray curling up and out of the booth. The actual exhaust hose feels a bit jank, especially the nozzle tip which doesn't really secure on and slips off constantly. Lastly, the electrical components seem kinda cheap. The lights and fans will briefly turn on when plugged in (even if they're off) and the power brick LED will remain illuminated for a really long time after its unplugged/powered off. Doesn't really affect the performance but it is unsettling especially when working with flammable paints.

The size of the spray booth is perfect for a small work area. The top and sides fold down to make it easy to store if not needed daily. Lighting is excellent and the whole unit is very easy to assemble. The fans are sufficient to do the job. I put an extra band clamp on the unit to hose to help prevent it coming off. A welcome edition for my small work area and prevents overspray. I am very pleased with the performance.

Very happy. There were other cheaper units but I'm so glad I bought this one. Assembly was very easy. Quality is excellent! Hardest thing was figuring out how to seal the duct opening in the window, but that was easily done with some pipe insulation foam from Home Depot. The variable speed fan and lights are great! Extremely pleased and well worth the extra money!

I got this to replace a smaller one I had, and the major feature I love about this one is the vent goes on the top, which works way better for my painting table at my new place. Provides a lot of suction and the light is really good, the only things I will add is the fans are LOUD, you're not gonna be able to watch TV or listen to music easily while this is running without headphones. And the suction is good, but the filter is aggressive, so you're going to end up with a bit of fumes ending up in the air regardless, so I'd recommend wearing a mask regardless

Reçu dans les temps, tout est là. Facile à installer et utiliser. Je l'ai seulement essayé une fois depuis l'installation et je suis très satisfait. Bonne puissance des ventilateurs et éclairage puissant, et belle largeur/hauteur de ce modèle comparativement à d'autres plus petits. Pour le modelisme de voitures ça va être parfait. Reste à voir sur le long terme...mais je suis très satisfait, je recommande.

Great product for the price. I have been using to paint model trains and it seems to be working quite well. The fans arent the most powerfull but I can paint in our living room without my girlfriend smelling any fumes even just a few feet away so it definitley works. Be sure to use plenty of ducting foil tape(not the plastic crap) on the hose joints. Easy to assemble.

This was so easy to assemble. Love the twin fans. The LED lights are in a better position than other makes. Rheostats for fans and lights are a great option for control. Sound levels are acceptable. Portability is convenient. Highly recommend this unit.

Initial unit got destroyed by the courier, but the return and reorder process was painless. This is a great quality/cost airbrush booth. Fans are powerful and the lighting is really well placed. Noise level is comparable to other cheaper foreign constructed products, which being said is not quiet. I've been using this for over a week now, very pleased.