ViewHD 2 Port 1x2 Powered HDMI 1 in 2 Out Mini Splitter for 1080P & 3D | Model: VHD-1X2MN3D

Used this to convert the HDMI output of a Playstation TV (PSTV) into VGA, so I could remotely play a PS4 on an old monitor (yes, really). This box removes the HDCP from the HDMI and then I had a separate cheap HDMI to VGA cable that would also split out the audio to a 3.5mm headphone jack. At first I tested this with my not-old TV through its 'Computer' VGA input port, but I was getting a blank screen and I was worried I had gotten a 'newer' model that doesn't work with HDCP as many reviewers have been complaining about. I could plug my laptop or a RaspberryPi into the splitter and it would work fine but the PSTV or Xbox360 were a no go (because of the HDCP issues apparently). Unplugged / replugged / turned it off and on again / used different cables but nothing seemed to work and I was getting ready to write up my bad review. As a last ditch effort, I plugged the VGA cord into the old computer monitor and everything immediately started working. Without this splitter, the simple HDMI to VGA cable did not work with the monitor as expected, so this splitter does seem like it's stripping out the HDCP, it just didn't seem like it at first when I used it with my TV. Its hard to draw conclusions since I have a complicated setup and I don't know how exactly these splitters and converters work, but perhaps there are certain TVs / monitors that simply won't work with this device for whatever reason. My recommendation if you're having problems with HDCP is to try it on another TV/monitor and perhaps you'll have better luck. If that doesn't work out, at least this device is cheap and it was worth giving it a shot.Bonus: My HDMI to VGA cable also has a micro USB power connector on it and I was bummed that I would need so many power cords for my setup (separate cords for the PSTV, splitter, and HDMI to VGA cable). I discovered though that when I power my HDMI to VGA cable via USB, somehow it also sends power to this splitter through the HDMI cable, thus I don't need the splitter to be plugged into power at all (all the LEDs light up and everything). And, when I connect the USB cord to the PSTV, the PSTV will only supply power when it is on. In short, when I have the PSTV off, it powers down everything, when I turn the PSTV on, everything powers on. It's magic how that all worked out. Long term reliability of the setup is TBD, but so far it's been reliable and it's nice not having this splitter plugged into the wall, taking up a socket, and 'on' indefinitely. I'll update the review if any issues crop up but so far I'm really happy with how it all turned out.

I bought this device because I am a LiveStreamer on Twitch.TV and I stream different gaming consoles like Xbox, PS4 and including the PS3 and PlayStation Vita TV.The PlayStation 3 / VitaTV both have an HDCP block which stops capture devices from capturing ANYTHING from the PS3's, and PSVitaTV's HDMI slot. So you WILL need an HDMI Splitter like this one.This device came with the 1x2 HDMI Mini Splitter, a power cable, and a User Manual. I don't think it came with an HDMI cable, I'm not too sure.This device has 1 HDMI input and 2 HDMI Output slots. and 1 power supply port.The 1 HDMI input slot is for connecting the device you want to capture like the PS3 or PSVitaTV.The 2 HDMI output slots 1 and 2 are for (Like I do) Connecting a TV (1) and a Capture device (2)What I like about this device is that there are also 3 red lights indicating that a signal is live (connected to) one of the HDMI slots and power itself.I know that these things can burn out from over use or always be connected so I make a habit of disconnected the power cable when I am done with the device to avoid over use of it.I've had this device since October 13th 2015 up until now December 13th 2015. It's been working flawlessly since purchase.Downsides:The only problem I had or some may have is that There is only 1 slot for connecting multiple consoles into 1 HDMI slot for.. say a TV. But it's not a HDMI Switch Splitter so I can't really complain or even argue with it. This is mostly used for connecting 1 device to capture and also use with your TV to watch as you capture with another device. For say if your capture device does not have HDMI Passthrough. (Connection: Console > Capture > TV)Overall:This device has been a GREAT help with my gaming and sharing experience It does exactly what it says and it works very great. '''''Attention: If you purchase any of these devises be SURE to not keep them plugged in all the time. Disconnect the power when not in use. So you are not overheating the device. Extend the life period by DISCONNECTING WHEN NOT IN USE. Constantly plugged in may cause device to heat up.

Works as advertised . Well built in metal case. Included power supply is nice to have too.