GE WB23T10015 Range/Stove/Oven Sensor

We have an older GE Profile electric range. The model number starts with JSP47xxxxxx, can’t read the rest of it anymore. The other day when attempting to use the oven, it beeped and came up with a “F3” on the display. After a quick google it turns out it is either the circuit board or the temperature sensor having gone bad. Luckily, it’s easy to pull out and test the sensor. Sure enough, with a multimeter it was clearly not showing the recommended 1082 Ohms. I searched everywhere for the sensor part but couldn’t find it anywhere. A Amazon search showed one reviewer here mentioning the same WBT21T1004 sensor number and having successfully replaced his sensor. I ordered it and installed it today. Everything fits perfectly. When I plugged the range back in the F3 was gone and it worked perfectly. I set the oven to 375F and let it come up to temperature and measured it with a IR thermometer and a meat thermometer. Both were within a few degrees of 375F, so it appears this is the perfect replacement part.

This GE temperature probe was for my GE oven model JTP70DP2WW (white, in wall style). 1 bolt secures probe, which is a T20 torx style head. Removed power at home circuit breaker. I did have to remove or slide out the oven and remove ~12 sheet metal screws to get to harness and disconnect. Disconnected old probe from harness, slid out probe into oven. Then new probe connector slides in from oven to back and reconnected. Reassembled sheet metal cover, replaced oven. I used a large cooler as a "table" to carefully slide the oven out of the wall cavity. Overall, 1 hr job. Pretty easy. All of the sheet metal screws were 1/4 nut size. I have a power drill that sped the process.

The last unit only lasted 3 years !

Exact GE OEM part. Came quickly. From time i placed order till new part was installed and oven was working was less than 24 hours. WOW great service. Would have spent all day calling and driving around locally looking for new part.

I first ordered the wrong oven probe/sensor for my older model Ge Profile oven. Food cooked or baked was horribly off. Using a good oven thermometer helped determine true temperature. Ordered the correct sensor and it works consistently now, but still off by 20 degrees. Finally, I found the manual and used its code to set the oven temperature down to match. It now works perfectly! Always a good practice to buy a manual oven thermometer to check accuracy of any oven temperature.

Worked fine but did not fix the temperatures from dropping.

Brand new OEM part fit and instructions were easy to follow.

I saved about $400 by doing this myself. My oven’s sensor was a WB21T10004 but this one works perfectly. I had to remove the door (for better access), Untighten old sensor, and untighten the broiler coils on top - and their origin, 4 small bolts in total (to allow old cord to come out of the back.) Took about 2 hours because I was careful… and was watching the YouTube videos that exactly show the procedure. (The hardest part was disconnecting the little clip from old cord to the sensor itself… but got it done). This is very doable… I’m no mechanical genius.