3 Set of 6Pcs Blank & Uncut Guitar Saddles and Guitar Nut Pure Bone 80x3x10mm, 52x6x10mm for Electric & Acoustic & Classical & Cigar Guitar, Mandolin, Banjo, Ukulele Part Replacement

Exactly what I needed. Great price and fast shipping. I’ll be ordering more.

These are consistent and certainly worth the price. You could pay more, but why?

Never did any guitar repairs or setup but this was a great experience and worked out well for me.

The package arrived safe and right on time. The saddles were intact and none were broken or damaged. I measured each saddle with digital calipers and they measured between 2.95mm and 3.05mm thick, 80mm long exactly, and between 9.95mm and 10.05 mm tall. So the sizes are acceptably accurate to the description. 4 of the saddles were perfect. They were smooth, hard, and consistent, and perfect material for a guitar saddle. The image with the green check mark is one of the perfect ones I received. One saddle was full of pits and air pockets, rendering it useless for a guitar saddle, air pockets and inconsistent bone is a no-no. This is the saddle with the big red circle, to show where all of the issues are located. Another saddle had a couple of air pockets but I can still use the saddle because I can compensate the saddle to remove the bad area. So I recieved 4 perfect saddle blanks, one flawed but still salvageable one, and one that is completely unusable.

The bone carved as expected and is functioning as expected.

Six pieces arrived in a nice, reusable package. Just a tad thick allowing for fitting as needed. Dimensions seemed consistent. Very nice overall and easy to quickly get to desired fit and finish. First one I used came out excellent.

The items come in good shape that I wait

All 6 nuts measure consistently within .05mm, but they’re undersized in all dimensions. The density seems okay and also consistent across all 6. The biggest PROBLEM is that they’re so rough you need to take off a significant amount of material off ALL FACES. These would be fine if you could/needed to use say 4mm x 8mm x 51mm, but sadly I CANNOT. I don’t normally order blanks and then have to take 30%+ off the rough dimensions. So while these are convenient to order and did arrive very quickly they’re of zero use to me and now are costing me even more time. I shoulda just went with Philadelphia Luthier supply or StewMac and I coulda had exactly what I need(and what I ordered) in excellent quality. So again to sum it up...SKIP THESE unless you’re just looking for THE CHEAPEST GARBAGE to PRACTICE making nuts and saddles.

Inmediatamente que abrí el sobre con el producto se ve la excelente calidad de material, no venia roto, ni astillado, muy bien definidos los cortes y medidas y su color blanco y puro, sin vetas de hueso que pueda afectar a la hora de trabajarlo, excelente producto !!!!!

ちゃんとした骨なんでしょうね。簡単には削れません。

なぜか突然3弦のみ1フレットにあたりびびってきたのでナットを修理に出さなくてはと思い、でも楽器屋に持っていく手間と修理期間を考えてると面倒になり、もしかすると自分でできるのではと思いたち動画を調べてみたらなんとかできそうな気がして、やってみたいと思い、やってみたら、当然プロよりへたくそですが以外にもできました

Good quality, bit on the expensive side for blanks but not bad.

普通に使えるもので、骨密度も問題なく音も悪くないです。切断後にわずかに反ったと思われるのが１枚ありましたが、これは実験に使うと思います。マイクロメーターで厚みを計りましたが、3.00mmを切るものはないです。微細な刃物跡があるので表面をヤスリで平滑にしましたが、表裏を各0.05mm ほど削ると取れる程度の浅い刃物跡ですので、中国製の中では優秀だと思いました（次に買ったらどうかはわからないのが中国製ですが）。1) 厚みを各３点で測定： 3.01mmから3.10mmで、多いのは 3.06mmあたり2) １本あたりの最大の厚みの差：max 0.04mm , min 0.02mm※クラシックギターだと、これを 2.40mmあたりまでブリッジに合わせながら削っていきますアコースティックギターだとこのままの厚みで使います。今回のは良い素材だと思いました。