Airgoo NEON Addressable RGB PC LED Strip, 15.75 x 0.55 x 0.28 inches diffused Silicon Rubber Tube, for 5V 3-pin argb Header, Come with Magnetic Brackets, Upgraded Blister Packaging

So I bought these...despite swearing I didn't want to add RGB to my new PC...alas here we are...anyways! I bought these and was a tiny bit skeptical considering there's other lightstrips out there that are usually a bare minimum of $20+ and aren't great at all. But you're going to tell me this lightstrip is affordable and uses the wizardry of MAGNETS?!? There's gotta be a catch right? ...suspiciously...no. The magnets are very strong. Zero problems adhering to the case (obviously if you have a metal case) and it even supports a bend around a frame. These are bright, work with a bunch of different software (mine's Aura sync) and it looks great. My PC case looks like the inside of a nightclub and I dig it...just...don't tell my friends please.

For $20, these light strips are an amazing addition to my build. They use the 12 Volt 4-pin RGB Header, which my motherboard has, so they can be easily controlled through the Asus AURA software that my motherboard uses. The color accuracy is very good, and the LEDs are bright. The magnets aren't super powerful, but they are good enough to keep the strips attached on each side of the case without falling. They probably won't stick to the top of the case very well, so make sure you've got room on the sides. I've been using them for a couple months now and have had no issues with them at all. I was worried that they might not work well in my ATX Full Tower, but they fit perfectly.

These are nice and bright, flexible enough to get to tight places, the hold downs grip the strip tight, the magnet in the hold downs are strong, easy to install, and easy to control with Mystic Light.I am taking one star away, because I hooked them up to my PC and they worked great, after I installed them in the case and fired it back up one of the strips was half dead. I was able to shift it around and the dead lights would work, but it had to be held in a certain position, has a lose internal connection. I could send it back for a replacement, but it is installed in a tight place that would be more work than worth. Luckily the place it is installed is as a backlight, so the lack of half the strip doesn't effect my end result. Does suck that they worked out the box but not an hour later.P.S. The only RGB in my case is on the GPU and these strips (one across the top and the other in the PSU Block as the symbol backlight), so yeah they are plenty bright.

If you’re wondering if you should order these lights... do it. I needed some RGB lighting for my new gaming build and the single AMD Wraith Spire that came with my 3600x just wasn’t cutting it. I got these lights not knowing what to expect and never having put lights in a PC before.These lights were very easy to install (magnets worked great!) and I only needed one strip (comes with two) to get exactly the effect I wanted. I feel using both strips would have been overkill. A single strip across the top of my case was more than enough lighting for the whole case (unless you want light to shine under your GPU.)Strips come with extensions so hiding the wires and putting the strips exactly where you want is easy.Once I figured out I plugged the lights into the RGB header on my motherboard upside down (lights either won’t work or lights will be backwards... red will be blue etc.) I corrected this and downloaded ASUS Aura software and had my light strip and fan light ring synced up and looking better then I even imagined.Sorry for the long review but I can’t state enough how happy I am with these light strips!

I installed these on an Asus Z390-E ROG Strix motherboard. I am happy to report that they work with AURA sync! Flawless pairing and syncing absolutely no issues insofar (about 1hr after install). The only con I can think of is that the included magnets are extremely hit or miss with their adhesion. My case is an NZXT H510, the strips are mounted behind the NZXT shield in the back and above the top of the case. While the middle magnets held, the magnets at the end of the strip did not. I ended up using some adhesive tape to tuck the ends up though so not really a big deal.Overall, if youre looking for RGB strips that work with Asus Aura Sync and are very bright I highly recommend these ones!

Recently started building project and thought I’d try these out. Easy to assemble and put together in a NZXT H210(mini itx) the strips don’t bend decently in a corner if you have to do it, but you aren’t going to get a full 90 degree hehe. The magnets are quite strong and I don’t feel worried at all they’ll fall or cause issues, but doesn’t hurt to zip tie them or something if you can.Started up the computer and they worked very well with Asus Aura sync.However my only major complaint about these these are that made me have to take off some points is that certain colors and brightness settings seem to cause the strips to emit a kind of high pitch humming noise. It doesn’t bother me much, but I can see this driving others mad. The lighting setup I wanted doesn’t seem to cause this, but other settings did so I feel like it deters me from exploring much.

The media could not be loaded. I have a MSI B450I Gaming AC motherboard. It only has the 4 pin RBG header. Pretty much means I can only have single solid color lights at a given time. Only motherboards that have the 3 pin aRGB headers can support the the crazy rainbow rgb lights you all have seen by now. This particular light was a simple install. Plugged it in directly to my motherboard and routed around my case. The magnet is pretty strong. Able to hold the bend around corners. All the lights came in bright. Mystic light, the program that MSI uses for controlling the lights is pretty basic for people with only the 4 pin. You can pick one of the 7 colors and setting the light will pulse at. As you can see mine is set for music. All in all, I’m satisfied with this product.