Magnetic Push Latches for Cabinets Jiayi 10 Pack Push to Open Cabinet Hardware Push Touch Latch Kitchen Door Push Release Latch for Drawer Closure Push Catch

I’ve only installed one, but it works perfect. If installed correctly it has plenty of adjustment. I suggest figuring out how to pop it off the base before you install it, you only get a few chances to pop it off and reinstall it before the plastic tabs will break. It’s a slim unit, half inch thick, so the plastic tabs are very small and prone to break with too much force or being used too many times. It pops out the drawer over an inch. The magnet works fine to hold it closed, it’s just a drawer on a desk so it doesn’t need to be super powerful. Makes for a nice clean look.

These are very nice, simple and easy to install. They have alot of travel for a small push latch, and stronger than the little ones which was what I needed it for. The little mounting bracket made installation a breeze, I was a little skeptical at the plastic bracket holding the latch, but it REALLY snaps in there and is rock solid, like surprisingly solid. Couldnt be happier.

Good alternative to ikea version.

There are many good things to say about these latches: They are inexpensive, don't cost a lot of money, are easy on the budget and very economic. On top of that, they are also very, very cheap.If you expect any sort of quality, look elsewhere. In the 12 pack I bought multiple latches had screws missing, missing adhesive stickers or stickers that were applied totally crooked. The steel 'plates' that go on the doors really flimsy - thinner than the adhesive stickers they (mostly) come with.The latch can be adjusted by screwing the magnet in and out on a plastic thread that starts to wiggle about once it's screwed out just a tiny bit.All that said, the latches do work, at least initially.

Perfect replacement or substitution for Ikea version. Half the cost. They screw into the sektion cabinet holes and fit perfectly. And they have a screw adjustment to get the piston in the perfect spot. You will want to use the screws from Ikea that fit the cabinet holes perfectly (the ones for mounting drawer glides). This is key. Go ask for some extras at the store. Perfect if you want this style hardware. Only drawback is having to push the cabinet door closed every time... But makes for a much cleaner look in your kitchen

Holes on the gray plastic mount fit perfectly on IKEA Sektion cabinets' mounting holes. Instead of using the provided wood screws, use the one provided IKEA Sektion drawer kit (you can get extra at the service desk of your local IKEA) There is no measure, no drilling. You just need to align the mounting bracket, screw it in.However, by default, the gap is too wide when I close the door, so I shaved about 1 mm off the plastic cap (the one you use to adjust the gap); otherwise, this is perfect. However, I don't think this is strong enough to open Sektion drawers, especially if you load the drawer with heavy items. I am not planning to try.

I was hoping to find an alternate to the Ikea touch latches since they were out of stock. These appeared to be similar but when we installed a few of these latches, they were too weak and did not push open the doors and drawer fronts enough to operate properly. They were also impossible to remove and we ended up having to brake them off. Unfortunately, by the time we installed them, the return time period had expired. Suggest waiting for the Ikea product or search for another option.

It works really well, the double-face tape is not that great any way you still can screw it.