DC 12V-24V 8000RPM 775 Brushed Vibration Motor Double-Head High Torque Electric Vibrating Motors with 2 Iron Rotating Mass

I was able to move one of the weights to 180 degrees from the other weight so the apparatus i 3D printed wobbled back and forth rather then straight sideways. I needed to mix powders with water in a centrifuge tube for 30 minutes and this worked perfectly when run on 3.5 volts. At 12 volts it nearly jumped off the lab bench! In other words, the range of vibration is great and easily managed using a good DC power supply. It is a well-built little motor.

I instythis in a full size virtual pinball cabinet I'm building. Great size and performance. Shakes hard enough that I turned the PWM down to almost half. Found a matching housing for it on thingiverse. Highly recommend if you need a toy for your build!

I attached it to a bucket with a screen to sift dirt. It vibrates the bucket wonderfully

I used this as a shaker motor in my Virtual Pinball cabinet per the recommendation of others. Works good for me. I even turned down the PWM level in DOF as it was too much at 100%. Working for about 3 months now with no issues.

I ordered this for a vibrating platform I've been conceptualizing. The motor provides vibration due to the offset mass on each end of the rotating shaft.

This motor is a work horse. Its been over heated and beat around alot and it keeps going and going. High quality. I have purchased 7 of them and have had zero issues.

This motor is small to small for my application.

A bit bulky, but it does what it is supposed to do. Shake!