CCTREE1.75mm PLA Filament 1kg Spool (2.2lbs) for 3D Printer, Black

If you’re shopping around for filament and your just scrolling down to see the reviews or what people are saying you’ll probably getting mixed reviews all the time but let me tell you that CCTREE PLA Filament has become my new go to filament, I believe I have gotten like 10 rolls of the filament all different colors before leaving a review and I have had ZERO bad experiences with it, I could almost say it’s prints flawlessly, I have a lil 3D printing store so I am making things almost every day, I’ve had 30 min prints to 72hr prints with this filament and have nothing bad to say about , comes in a typical filament box, shrink wrapped in plastic bag to protect your filament , you won’t regret buying this and for the price you can’t go wrong.

I bought the black PLA and had issues with it making a mess of my prints. I used other colors from the same manufacturer (white, silver) and had no problems. I exchanged the black for a new one. The new one printed better, but is all tangled up. So, instead of a mess i have prints that dont finish because the PLA get tangled and stops feeding.I dont know if I will buy from this company again, since the results are inconsistent and I have a box full of wasted plastic.The silver, which I bought at the same time does not have the same problems. Its a nice dark grey color with metallic flecks in it. I have printed more than half the spool with a lot of success.

Printer spool not completely round. If you use a printer spool holder which the school sits on in rides on bearing wheels, do not buy this 3D printer filament. For some reason there were holes cut in the spool which does not allow it to rotate around in this type of printer spool holder. Had to send it back, as one of my printers uses this type of holder. Also, the photo in the item listing does not show this weird characteristic of the 3D printer spool.

This Spool of PLA is at a extremely Low price. It printed vary well with only the tension on my extruder being to high and chipping away at some of the plastic that allowed it to skip and create the 2 lines in the prints. I believe if I had printed on my newer printer that is currently being rebuilt this would have not been an issue. My overhand test found that at a 50 degree angle had no issue and 55 had vary little. For bridging no issues till 15mm and even at 25mm the bridge performed exceptional to other PLA tests in the past. Overall if your looking for a spool of filament at a great price and have an adjustable tension extruder give CCTREE a try.

I have the Flexion Extruder which is known to have issues printing PLA (it was designed for flexible materials). I've tried many brands but hadn't found a black PLA that didn't give me fits until now. This filament prints butter smooth, and at lower temps than I've had to use with other brands to get decent extrusion. My test print in the photos was printed at 215 and I should probably drop it another 5-10 degrees. I am very happy with this filament and will be ordering other colors as well.My only complaint is that they do not include a resealable bag for storage. Only a few manufacturers do, but it makes a huge difference in customer satisfaction.

Will upload pics.Usually really like the brand but for some reason the black has lots of issues. Mainly popping and bubbles. Immediately out of the sealed bag you can see from a distance little dots on the filament. These are little bubbles which cause popping and printing issues as it extrudes.

Printed a handful of small things so far and I am loving this stuff. I print it at 60 degree bed and 220 nozzle and the results have been great. Going to try a larger print with it soon.Update: I am about half way through this roll and no clogs no tangles and no problems. Printed a larger Groot I added in my photos.

When I purchased my cr-10 there was a roll with sample filament. I tried several different brands but wasn't able to get same printing quality.Then I eventually found CCTREE filaments on amazon. With this filament the results are the same as with original sampler. I've purchased black, white, silver,skin, bronze and copper CCTREE filaments. I'm extremely satisfied. Prints are very smooth, adhesion is the best (in comparison to other filaments I tried) and pretty fair price.I wasn't able to find better filament for my printer. So I definitely recommend this one.

This filament had excellent consistency pretty much through the entire roll. I did notice a bit of moisture towards the end of the roll, but I believe this was due to it being super fresh and could have been eliminated if I had opened up the roll and placed it in my dehumidifier bag prior to usong it like I normally due. I would like to see the price around the $17.99 range cause i feel like there are other filaments that are just as good for that price. The tolerence is rsted for +-.05 and it was withing that for every measurement i took. I would like to see that improve to +-.03 Overall this is a good filament and you can expect good prints with it.

This came packaged as well as eSun or any other brand filament I've bought. Great vacuum seal with dry pack. If also had a layer of clear wrap over the filament inside the vacuum bag I guess to keep filament wound tight during shipping. It prints really smooth and final object has plenty of shine. I measured several spots and didn't find any areas out of tolerance. The filament on spool seems a little more flexible then some other brands, not sure if that's a good or bad thing but it prints great.

Good filament and a pretty decent price. This was the first filament I tried that wasn't the crappy beginner stuff sent with my printer. Works best at a 215-225 temp in my printhead, and gets a nice glossy finish. Overall very happy with it and curious to see if I can get it better with a layer cooling fan installed.

Filament printed well. Love the open spool so I can see how much is left. The brand name is embossed into the spool which is greT since I don’t typically put the filament back in the box. Great value...

Normally I don't have much luck with black PLA. CCTREE was different. It printed great. Came out with a nice shine and very smooth. I was actually very impressed and would recommend it to anyone looking for Great filament. Great price also. Looking forward to using it again!

Amazing filament. Prints like $35 filament. Prefect diameter everywhere I checked, not brittle, no bubbles, and great color saturation. I go through 20 rolls a month of this stuff and have zero issues

Such a great product. I love it A+