Windshield Wiper Cowl Vent Grille Cover Panels Kit Compatible With 1999-2007 F250 F350 Excursion(Driver&Passenger Side)-Replace Part# 3C3Z-25022A68-AAA & 4C3Z-25022A69-AAA

It is the perfect fit for our F550. Makes it look ew again

Excellent fit and finish. Just a few pointers, you'll have to glue on the weather strip seal as it doesn't hold in place during installation. Also the kit doesn't include two small foam filler pieces that are on the original. The washer nozzles are kind of loose fitting but it's not a concern. For the value 8/10 would highly recommend.

This product was really easy to work with and really improved the look of my truck. It looks just like the original.It comes with a rubber washer line to replace the old one under the cowl. Make sure all the lines and connectors on the new line are open before you screw down and mount the cowl. On the driver side the new little 90 degree fitting from the kit that attaches to the nozzle was blocked. I had to take a drill bit, hold the bit in my hand and open up that fitting. Now works fine but had to remove the cowl to fix this issue.Now it works great and I like it.

Fits perfect, priced right looks good but you gotta add a sealant to rubber seal to windshield. That parts cheap n I expect it'll blow out after 20 or so smiles down the road whichll turn to 20 frowns down the road n I'll take it all off again and use a black rtv to hold seals in n it'll be good as oem at 9 bajillion % more.

I was skeptical to order a part that wasn’t OEM, that said, I am very impressed with the fit although the finish wasn’t perfect, I don’t think anyone would ever notice but me. The original was broken and brittle and this was a great replacement. As others mentioned the weather stripping wouldn’t stay in place but I glued it in place and expect it to last. Overall great option for my 25 year old truck.

I was really surprised this fit as well as it did on my 2005 F250. Couldn't tell any difference in this and the original one it replaced. I will say, though, the weather strip pieces don't wanna stay put, so I took care of that with some 3M 4200. Other than that, identical to OEM

Good fit. Good value. No problems

I have a 2001 Ford Excursion that had a small break in its cowl shield. So after searching various options, this seemed the best fit considering the value and the apparent fit based on the other reviiews. Not so much.Okay, to start, the included weather stripping would not stay on, but as noted in another review, just used some black silicone weather stripping adhesive. Let it cure overnight and we're good to go.Started trying to fit to the truck. Not horrible but certainly not perfect. Finally after struggling for about an hour or so, got it on as best I could. Would be just okay if that's as far as I needed it to.However, and here's the thing that really irritated me, the nozzles for the windshield washer sprayers are just not acceptable. They are barely (and I use that term generously) clipped into the cowl screen and constantly move around. Would be easy to break them if you're not really careful in reassembling the washer fluid hoses. Once the shields were installed, I thought I could find a way to properly seat them and then aim them so the spray would be effective.Not at all.Going to pull them off, trash them, and reinstall the old ones that are only minorly broken - but at least I know the nozzles for the washer fluid will work properly. A critical issue for where we live with lots of snow and spray on the windshield. Very disappointed after reading all the mostly positive reviews. [And I'm an experienced auto DIYer and thought this would be pretty simple. Nope. :| ]