For Part NO: 497680 498144 Fits Models: 099772 099777 110600 111600 111600 120600 120H00 120K00 121600 121K00 122600 122K00 122L00 122M00 122T00 123K00 124T00 125K00 125K00 126400 126600 126L00 126M00 126T00 127700 127800 128600 128800 128L00 128M00 128T00 129600 129700 129800 12E700 12F700 12F800 12G800 TORO 16401 20010 20011 20020 20021 20022 20023 20023c 20025 20027 20028 20029 20030 20035 20042 20043 20045 20048 20445 20448 20449 20110 20450 20452 20457 20458 20469 20478 20489 20490 20493 20494 20495
S**D
You need to have some know how to install it like I did (which is better than manufactured)
With products like this you need to have some know how skills. My old unit was factory into the cover with a rivet gun. I didn't want to go that route due to the time it would take to pickup rivets that I would only end up using once. I drilled the holes in both my mower and the new unit to accommodate the new bolt and nut setup. Installed them reverse bolt sticking up from the bottom for the rotary clearance. I also replaced the new string with my old string. I finished cutting grass that day.....
B**S
Installation may not be so easy
The product is exactly as advertised but my older Toro mower had the starter cord assembly pop riveted to the top of the engine. Each of the four rivets had to be drilled out and all the shavings blown/vacuumed away so they wouldn't get into the engine. I also had to buy a larger pop rivet tool to install the new starter cord assembly.
A**S
Just like the original
In the world of "everything's reviewed", you're always going to find a dissatisfied customer. I learned with this product that you need to be wary of negative reivews, unless a product stands out via negative reviews.Truth is, this one works just like the old one. Could it fail prematurely. Well, so far so good, and it's been a summer's of use.
P**P
Plastic pieces
After part was installed, the part worked great...unfortunately after the 2nd use of this piece, it gets stuck and won’t help start the lawn mower. We have to jerk on the rope multiple times in hopes that the plastic fins will pop out and rotate the motor in order for the mower to start.
A**R
It fit perfectly and works great
other than the fact I had to drill out the 4 original rivets holding the old recoil starter in place, which is easy as pie. Then I re-riveted this new unit in place which took all of 4 minutes start to finish, I pulled the rope and absolutely nothing happened.... then I remembered- put the gas in and put the spark plug back in and then pull the rope and the mower fired right up.. works like a champ
R**N
Cheap
Worked as needed
L**Y
Quality part!
Replaced on my 6.5 horse Briggs and Stratton motor on a garden tiller and it works great.
L**E
Lawn
Wrong part
Trustpilot
2 weeks ago
1 month ago
