Tips: 1: After mixing the A glue and the B glue in a weight ratio of 3:1, the mixture was stirred for about 2 minutes until it became clear. The temperature of the stirring is recommended at 77 Fahrenheit. If it is in winter, please use 140F warm water to heat it. The low temperature will make the resin thick and easy to produce bubbles. 2: Working time about 30 min. the thinner the resin, the longer the working time, The thickness of the resin during work is recommended not to exceed 0.4". Cooling with ice water can further increase working time. 3: A relatively large bubble is easily generated in the vicinity of the filler, and the bubble is pierced using a toothpick. 4: Do not need to be layered to improve work efficiency. But when the temperature is greater than 86F or the mold is very large, it needs to be cooled with ice water. The setting time was 72 hours. production description: Widely Used in Resin Molds casting and tables and bars coating, super hard, super clear, Super Gloss Large molds do not need to be layered to improve work efficiency. When the temperature is greater than 86F or the mold is very large, it needs to be cooled with ice water. The setting time was 72 hours Mix A and B glue in a ratio of 3:1 by weight, 1:1 by Bottle Height, 2.5:1 by volume. stir until clear, set aside for a few minutes,and then start to use No BPA. No VOCs. No fumes. Non-flammable. Not easy to generate bubbles, Not for Food using Working time about 30 min. the thinner the resin, the longer the working time. Cooling with ice water can further increase working time Package Included: 1 Bottle Clear Slow-Setting Epoxy Resin ( Glue A), 26.4oz, 750g 1 Bottle Clear Slow-Settingr Epoxy Hardener ( Glue B), 8.8oz, 250g
Trustpilot
2 months ago
2 weeks ago
