Gordon Glass® Clear Tapered Shower Door Bottom Seal and Sweep T Type - 36 in Long, Height - Tapered from 7/8" to 1/2"

Replaced cracked bottom door seal with this one. Easy to install.

Serves the purpose very well.

Purchased in May '13 from Gordon Glass. Fresh stock, flexible seal, perfect fit!The seal on my original 9 year old shower door needed replacement. The seal has hardened and cracked and consequently started falling apart. I pulled out a 4" long piece intact and noticed that it's a T-seal, with the top of the T being 5/32 wide and approx 7/16" tall. Since my original seal was in pieces and I only used a 4" piece for reference, I never noticed that it was tapered.I kept looking everywhere on the net for a 5/32 x 7/16" but could not find anything that came close. The only T-seal that I could find that is 5/32" is this one. But it's 7/8" and that's not what I need (I thought - I didn't pay attention to the fact that it's tapered). I decided to order it anyway, thinking that I can cut it lenghtwise to size, although it would have been a major hassle.When I received the replacement and removed the original seal, to my big surprise I noticed that the original one was tapered too. The replacement was about 10" too long and needs to be cut to size. When I cut a few inches off one end, the 3/8" height of the replacement seal becomes 7/16". Turns out it's an exact replacement for the old seal.So, if your T-seal is 5/32" wide, there's a good chance this is the one. Don't make the same mistake I did and waste time by being fooled by a small sample piece of the original seal - pull out the complete old seal so you can see if it's tapered or not.

Worked great. Just make sure you are ordering the right part. I was working on a Basco door.

We have a single pivot shower door. Tried finding this locally as the original seal was only 7 years old and we weren’t ready to redo the bathroom. Took a few minutes to find on Amazon but it fit perfectly and trimmed easily with regular scissors (trimmed to fit our door). Perfect and easy!

Neither liked nor disliked

This product was the wrong size for me. I carefully measured my old strip, though fairly damaged, and I was “certain” it was a 5/32 T. When the product came it was too large. why they measure these this way is beyond me! Millimeters would be so much easier & exact, with less error! Who has a ruler with 32’s on it? Anyway, their return policy basically is a hassle & ripoff, requiring manf approval, a restocking fee & you pay for shipping, so I opted to try to trim the T smaller. Impossible! So I will just chalk this up one up to a loss and try again with a different product. That said, the quality seemed quite nice. It wasn’t too linked or twisted. The vinyl seemed pretty sturdy. Wish I could’ve used it! So, buyer beware…. Get the EXACT measurement before you order, like they say!

My original seal was 7/8" wide along the entire length. I thought I would try this tapered seal (Part # ZV904V) instead and installed it with the narrower end placed nearest to the door hinge side - which is also closest to the shower head. This orientation worked out well and splashing water doesn't escape beyond the seal at any point along the entire length. I was originally was concerned that the 1/2" wide end might not be tall enough but it still makes contact (barely) with the threshold. Seal is a flexible vinyl and was packaged rolled-up so that kinks did not occur. Ordered from Technologylk.com on July 23rd and received on the 29th.