WLJHT10 Led Interior Lights Car Gauge Dashboard Dash Light Instrument Cluster Panel w5w 2825 194 Led Bulb Twist Socket Pc195 Pc194 Pc168 Super Bright 12V (White,Pack Of 6)

I bought these LED bulbs for my 2000 Toyota Camry. Installation was super easy. The initial brightness was stellar. There's a reason for me say initial. Last night, 11/24/2019 I had absolutely no dash lights. Reason being is that all of the LED's have fallen off the bulb housing. My car needed 5 of these bulbs and they come in a pack of 6. I took all of the bulbs out and compared them to the one that was not used. As you can see the one on the left still has it green LED's on the top of the bulb fixture the ones that came out of the car on the right are all missing them. I would not recommend these at all unless you want to keep replacing bulbs every month.

It did take some time to get these lights, but for overseas shipping it wasn't bad. I'm replacing the factory dash lights in my 1984 Chevrolet C10 pickup. Not only did these lights come with new sockets, they interchange with the old sockets perfectly. They have a good dim range between 6v and 10v. Amp draw is negleable, especially compared to the factory lights. They do flash below 6v so on min dim you might experience this. Only other thing to add is they are polarized. If they don't work when you first plug them in, flip them around. A+

Applied to 1990 Chevy Suburban with OEM old school dull incandescent instrument panel lighting. Didn’t initially realize needed T10 size for gauges. Other than gauges , installed T5 Seagate LEDs ( A/C control, courtesy, dome, dash, vanity) which worked out great. As with other reviewers , share concern about qualityof T10 LEDs as compared with newer T5’s , longevity of which remain to be seen.However, installed easily, no problem with twist fit of bulb base into circuit board as described by others. Illumination is just right, retains ability to dim with OEM set up . Will see how long they last .So far , all good. You decide

Awesome lights they look killer, they do dim but not to the extent that regular bulbs do. but id give it a 9/10. shipping is faster than tracking says dont expect to rely on those dates.

I order for a 2005 Chevy Silverado. As the fit guide said it fits. Well that was not the case and partially my fault for not knowing that my lights were soldered in, not twist bulb style. That said I would give these lights 5 stars due to the function and extreme brightness. I took them out of the bracket and directly soldered them to the board instead of returning. They are almost to bright in my instrument cluster. If you want bright back lighting these are super bright

Use this to swap the old lights in my instrument cluster. Good brightness and work well.Update: I’ve had these in my 02 Silverado for just over a year and the whole right side went out. About a week later they all went out. LED bulbs should last a lot longer than that especially since I don’t drive this as my primary vehicle. Also as others have said the twist lock can go too far so you have to back them off a bit to get them to work. They have never really been dim-able but was ok with that. I’ll not be buying these again for replacement. Very disappointed.

I installed these in a 1999 tahoe gauge cluster. The lamp holders fit the lamps and the holes but they will rotate further than needed and wont make contact with the printed circuit board. I used the factory lamp holders and that worked fine. All the lamps worked but 3 were brighter than the rest and I have hot spots (brighter light) at those locations. The rest of the lamps are perfect. I'm going to look for a different brand and see if I can get lamps that are all the same color.

These lights are pretty neato. There was a little problem with getting them to light up. They are at a different angle when clicked in but if you turn them back slightly, they come on perfectly. In the packet you get 6 leds and 6 holders for them. 2 of these holders were too loose to hold the lights but I used a screwdriver and bent the metal inside that holds the LEDs and it stiffened up pretty well. 10/10 am recommending these.

Dash lights at night in my 50 year old car were barely visible. I installed these and the difference is like day and night, no problem seeing the dash now.

These lights are great. Only problem is that they did not work with the provide twists. No biggie just used the original ones. Love them!

Good product, if I was to critique is I wish they were dimmable, overall I’m happy with the product

Dash of my car. The brightness.

Used on boat gauges fit good and are way brighter then the reg bulbs