MICTUNING 7 Inch Round 80w LED Headlights with High Low Beam, DRL, Dynamic Amber Turn Signal compatible for Jxxp Wrangler JK LJ TJ Black (2 Pack)

These headlights have been on my Jeep CJ5 since 2018. The old CJs use a standard H4 plug and have no computer, so the only wiring involved was for the DRLs and turn signals. I made my own 1/8" thick aluminum mounting plate so they are rigid to the front grille. People complain about low beam being dim, but let's not forget these are projectors - not reflectors - and are designed to be aimed at the ground, not into open air. I am very pleased with these, I would say they have the brightest high beams on the market that I have witnessed. They are not DOT/SAE approved, but I live in Florida so it doesn't really matter. At $90 on Amazon and $60 for the same set on eBay, they are worth every penny!

I used these 7" lights on my Vanagon, it hooks right up to the plugs on early models (80-84) and fits in the stock headlight buckets. They look much better than the cheaper LED's that are behind a clear lens that gets moisture in it easily. The lights are VERY bright, so it is a huge upgrade but since the lights are LED they dont pull extra power. Easy to integrate turn signal and DRL's. I installed mine with protective covers as seen in the pictures, I will likely buy another set for my truck. Will update if my experience changes

To everyone complaining. U got an 80w headlight for $100. Shutup. I put them on my 77 c10 They say they don't fit in the mount because of the bevel, nothing a dremel can't fix but i just put longer screws in the mounting bracket and it fit with plenty of room to align. DO NOT CUT ANY FINS! THEY ARE NOT DOT APPROVED, no cut off line but if you know how to align led headlights you should be fine. Plug and play is always awesome. Very good quality. It has running blinkers btw make sure you check their going the right direction first. These things are honestly brighter than camera can capture. If they had fit in the bracket out of the box it would be 5star I will update if anything happens

The media could not be loaded.  Installation takes a bit of patience but once installed great lights and love the turn signals.

GOOD:Let me start off with the good. They look great on the vehicle when off.BAD:Nighttime use: When using at night get ready for people constantly flashing you as theses are not DOT approved. There is no cut off line and you will just blind everyone with the flood pattern these have.Fitment: They tell you if they don’t fit to cut the “tabs” on the rear of the bezel. Normal I am not adverse to a little modification for the right product, however these DO NOT fit in a normal 2016 JEEP Wrangler JK. The headlight “bucket/mount” is beveled in, these lights have straight heat dissipating fins that hit this and prevent you from mounting correctly.I clearly can’t return them now because I had cut the “tabs” as it said, only to find the fins are the real issue. I have them on and the ring holding the headlights in is about 1/2 inch from clamping the light in. Let’s see how long it holds. I will most likely be looking for some DOT lights soon.WOULD NOT RECOMMEND if you are using them as headlights. As auxiliary pods, they would be an awesome product.

Needed to modify the finned area to fit inside a stock head light bucket on a 55 belair! Also they need to be made right and left handed to be useful with the sequencing turn signal function. Had to flip the passenger side to work correctly, but that caused a problem with the “keys” on the back of the housing that locate the light in the bucket! The light is bright, but a bit too diffuse on low beam. High beam is good! Also no way to aim the low beam vs. the high beam! Overall I like the look and overall function but could be a bit better.

Easy inatallation and they look good and work perfectly 👍

These worked nice in my Porsche the same diameter stock lights were in the at before so all I had To do was wire H4 plugs and they work just fine. Tied them into the turn signals as well and they work great too.

Muy buen producto recomendable

I purchased these for my 2018 Wrangler JK. I was running with OEM halogens and these are 1100% better. Installed, I have no problem with flickering, and I did not install an anti-flicker harness. For the price, they are great headlights and I am very satisfied. They're far more unique than the halos everyone puts on their Wranglers, and different was the look I was going for. I would love to give them a five star, however, these lights require a harness adapter for factory wiring harnesses, and while they did not throw any codes and are compatible with my Wrangler, they are definitely not specifically designed for it. Most of the fins had to be grinded off, leaving them loose in the housing. I was able to shore them up so they are stable in the housing, I attached a photo of how much had to be grinded off. If you are looking to add these to your Wrangler, it is possible and they look awesome, but it's a very frustrating process.