VIVO Triple Vertical LCD Monitor Height Adjustable Desk Mount Stand for 3 Screens up to 27 inches STAND-V003D

This thing is perfect, exactly what I needed. I almost didn't get it because another review said it couldn't angle down far enough. That's wrong. If you know what you're doing, the back joint that connects the monitor to the stand lets you rotate it in any direction, and lets you easily angle it very far down. Definitely recommend!

As an Engineer, I do not usually comment much on product design, but today will be the exception. This monitor stand has some exceptional features. You can easily attach the VESA mounts to the monitor and then lift the monitor onto the stand. The “taper” mount allows it to easily capture and hold the monitor hands-free while you put in a retaining screw. Very nice tilt, swivel and rotate mechanism, also with a locking screw. Another fantastic feature is that the mounts have plastic sleeves so you can actually raise and lower the monitor on the post and slide with ease (I have a couple of other stands where you cannot). All hardware, fasteners and even tools included, so another plus. Simple to assemble. Monitors seem very stable on the base mount, even way up high. This stand has sufficient height, that you could configure two monitors, one in Portrait and one in Landscape orientation as well.

Bought three of these for a project of mine. Mounted three Dell 17" monitors with sound bars attached underneath them and there was no problem. Cables clips all the way down making routing cables easy and the stands themselves are very balanced with all three monitors on each. Not a common use-case for most people but they are perfect for my use.

Really great stand! Don't believe the negative reviews. This is very easy to assemble. The design is great. I have the 2 monitor verticle Vivo stand. The one with the big bulky base. This replaced it. I prefer this design. The base is not bulky. You can change monitors without taking off the other ones. Seems easier to adjust and stays in place better. I put three 27" monitors on it. Right next to a 65" 4K TV. Connected to a self made PC connected to a 7.3.2 ATMOS/DTX-X sound system. I am a multi tasker.

Plan to have a 2nd person help... esp to hold the monitor in place while you tighten / lock them in place.

I used the stand to put a 3 monitor holder onto and then raise my monitors so that I can put my 17" laptop underneath. I then added a small wide monitor on top of it all so that I can see important information scroll by, and added a small speaker holder I made with clamps to clean up my desk (this goes at the bottom and behind my laptop. Not using it exactly for what it was intended for, but it works for me and was worth the price. to keep it from falling over, I used a 20lb weight that had the correct diameter and put the post thru it. This thing is never falling over - even with an earthquake!

Fantastic product. I use this for a sitting/standing working solution in conjunction with the "Titan Height Adjustable Monitor Stand by Stand Steady" as a keyboard/mouse booster stand. I have two monitors mounted on my Triple LCD Monitor Desk Stand, one at a comfortable sitting height and one at a comfortable standing height. I keep the Stand Ready stand on my desk, and I can happily place my keyboard and mouse underneath it when sitting. When I stand, I place my keyboard and mouse on top of it at the height I customized it at. If I could improve anything about this product it'd be to make the vertical tilt a little easier to tighten.

I've used several VIVO products in the past, and for the money they have been pretty stellar. This triple vertical stand was so close to being another home run, but they crippled it with the stupid monitor mount and unnecessary complexity in assembly. For starters they opted for screw connectors for each pole section, as opposed to previous use of a coupler device. Because they are screw connectors they require a set screw, the set screw was obviously an afterthought as it literally does nothing, and you can still rotate the poles even with the set screw in, and the allen key for the set screw was loose in the case, making it very easy to get lost. Thankfully I order more than one of these because one of my shipments did have a missing allen key for the set screw. The monitor mount they went with is a circular ball mount, rather than the tried and true pivot mount. meaning that you need yet another set screw to tighten it down. Guess what? your range of motion to tighten that set screw is only a quarter turn each time, and once you do have it tight, it does very little to stop the screen from moving around. Also because of the circular mount, the monitor would regularly slide off while trying to mount it. I ended up dropping 2 of my monitors during the mounting process over this design oversight. The old design, you knew before you ever started lowering it onto the mount whether you were lined up or not, heck one of their other monitor mount designs has a guide post that literally guides you in. I was able to put my monitor on those completely blind, and yet with this version I was struggling to get it on, when I was staring right at it. Lastly 4 different allen key sizes!?! I can understand having a couple different sizes, but all of your products I've used up until now used 2 sizes, they were the same 2 sizes. You had a big, and a little. Now you literally have a different sized allen key for each section of the stand. What happened to the old VIVO that actually put out good products at a decent price? In conclusion, the pole, and base are good, but if I were to do this again, I would save myself the headache, and buy different monitor mounts for their stand. The mounts are trash.